how do I reset the tire pressure monitoring system on a Ford Explorer Fifth Generation (2011-2019)?

Ford Explorer Fifth Generation (2011-2019)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

392 words

Problem Statement

Learn how to reset the tire pressure monitoring system (TPMS) on a Ford Explorer (2011-2019). Step-by-step instructions for accurate tire pressure readings.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure vehicle is on a level surface when checking tire pressures.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•Warning message displayed on the vehicle’s information screen

Diagnostic Steps

1
Ensure all tires are inflated to the recommended pressure as per the driver's side door jamb label.
2
Turn the ignition to the 'ON' position without starting the engine.
3
Locate the TPMS reset button, usually found beneath the steering column or in the glove compartment.
4
Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release the button.
5
Start the engine and allow the vehicle to run for about 20 minutes to allow the system to recalibrate.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure all tires are inflated to the recommended pressure as per the driver's side door jamb label.
2
Turn the ignition to the 'ON' position without starting the engine.
3
Locate the TPMS reset button, usually found beneath the steering column or in the glove compartment.
4
Press and hold the TPMS reset button until the TPMS warning light blinks three times, then release the button.
5
Start the engine and allow the vehicle to run for about 20 minutes to allow the system to recalibrate.

Solution

1. Prepare the Vehicle

Ensure Proper Tire Pressure: Check and adjust the tire pressures of all four tires to the manufacturer's specifications.
Gather Tools: No special tools are needed for this procedure.

2. Reset the TPMS

Access the TPMS Reset Button: Locate the TPMS reset button under the steering column or inside the glove box.
Turn Ignition On: Turn the ignition key to the "ON" position without starting the engine.
Press the Reset Button: Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.

3. Initialize the System

Start the Engine: Turn the ignition to the "START" position and let the engine run for approximately 20 minutes. This duration allows the TPMS to recalibrate and recognize the tire pressures.