how do I reset the oil change light on my Ford Explorer Fifth Generation (2011-2019)?

Ford Explorer Fifth Generation (2011-2019)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

322 words

Problem Statement

Learn how to reset the oil change light on your Ford Explorer (2011-2019) with this easy step-by-step guide. Ensure proper maintenance signaling.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' to prevent unintended movement during the reset process.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance message displayed on the instrument panel
•Engine oil change completed but warning light remains on

Diagnostic Steps

1
Turn the ignition to the 'On' position without starting the engine.
2
Press the gas pedal three times within 10 seconds.
3
Turn the ignition off and then back on to check if the light is reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for reset.

Parts Required

•None required for reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Make sure the vehicle is in "Park" mode and the ignition is off.

2. Turn Ignition On

Insert the key or press the start button to turn the ignition to the "On" position without starting the engine.
Ensure that all dashboard lights illuminate.

3. Reset Oil Change Light

Quickly press the accelerator pedal three times within 10 seconds.
Ensure each press is deliberate and complete.

4. Turn Ignition Off and On

Turn the ignition off completely.
Wait a few seconds, then turn the ignition back to the "On" position again to verify that the oil change light is no longer illuminated.