FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I resolve a problem with the dashboard lights not working in my Silverado 1500 T1XX? - Chevrolet Silverado 1500
Home/Cars/Chevrolet/Silverado 1500/T1XX (2019-2023)/How do I resolve a problem with the dashboard lights not working in my Silverado 1500 T1XX?

How do I resolve a problem with the dashboard lights not working in my Silverado 1500 T1XX?

Chevrolet Silverado 1500 T1XX (2019-2023)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
679 words

Problem Statement

Learn how to diagnose and fix dashboard light issues in your Chevrolet Silverado 1500 T1XX (2019-2023) with our step-by-step guide.

Affected Component
instrument cluster
Estimated Time
2-3 hours

Symptoms

  • •Dashboard lights completely off or flickering.
  • •Instrument cluster not illuminated.
  • •Related warning indicators may not light up.
  • •Other interior lights may function normally.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Fuse puller
  • •Basic hand tools (screwdrivers, pliers)
  • •Wiring diagram (for troubleshooting)

Additional Information

Affected Component
instrument cluster
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem: Dashboard Lights Not Working in Chevrolet Silverado 1500 T1XX (2019-2023)
Tools Required
  • OBD-II scanner
  • Multimeter
  • Fuse puller
  • Basic hand tools (screwdrivers, pliers)
  • Wiring diagram (for troubleshooting)
Repair Instructions

Step 1: Inspect the Dimmer Switch

  1. Locate the Dimmer Switch:

    • The dimmer switch is usually located on the left side of the steering column or on the dashboard.

  2. Adjust the Dimmer:

    • Turn the dimmer switch up and down to see if the lights respond.

Step 2: Check and Replace Fuses

  1. Access the Fuse Box:

    • Open the driver-side door and locate the fuse box cover. Remove it.

  2. Identify and Inspect the Relevant Fuse:

    • Refer to the fuse diagram on the cover or in the owner's manual.
    • Use a fuse puller to remove the fuse and visually inspect for damage.

  3. Replace the Fuse:

    • If the fuse is blown, replace it with one of the same amperage rating.
    • Reinstall the cover and test the dashboard lights again.

Step 3: Scan for Diagnostic Trouble Codes

  1. Connect the OBD-II Scanner:

    • Plug the scanner into the OBD-II port beneath the dashboard.

  2. Read Codes:

    • Follow the scanner prompts to retrieve any stored codes.
    • Take note of any relevant codes.

  3. Clear Codes:

    • If codes are present, clear them and check if the dashboard lights function properly after a reset.

Step 4: Inspect Wiring and Connectors

  1. Access Instrument Cluster:

    • Remove screws or fasteners securing the instrument cluster (refer to repair manual for specifics).
    • Carefully pull the cluster out to access the wiring.

  2. Inspect Wiring:

    • Check for any signs of wear, fraying, or damage to the wires.
    • Ensure all connectors are seated properly.

  3. Use a Multimeter:

    • Set the multimeter to the appropriate setting to check for voltage.
    • Test the wiring harness for continuity and voltage at the instrument cluster.

Step 5: Replace the Instrument Cluster or BCM (if necessary)

  1. If all previous steps fail:

    • You may need to replace the instrument cluster or BCM.

  2. Remove the Instrument Cluster:

    • Disconnect the negative battery terminal.
    • Remove the cluster as per manufacturer’s instructions.
    • Install the new cluster and reconnect all wiring.

  3. Reprogram (if applicable):

    • Some clusters may require reprogramming using a scan tool.
Final Steps

  1. Reconnect the Battery:

    • Reconnect the negative battery terminal.

  2. Test the System:

    • Start the vehicle and check if the dashboard lights are functioning correctly.

  3. Finalize and Clean Up:

    • Ensure all tools are removed from the vehicle.
    • Secure any panels or covers removed during the process.
Conclusion

If the dashboard lights continue to malfunction after following these steps, it may be advisable to consult a professional technician for further diagnosis and repair.