FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I troubleshoot the tire pressure monitoring system in my 2021 Chevrolet Silverado 1500 T1XX? - Chevrolet Silverado 1500
Home/Cars/Chevrolet/Silverado 1500/T1XX (2019-2023)/How can I troubleshoot the tire pressure monitoring system in my 2021 Chevrolet Silverado 1500 T1XX?

How can I troubleshoot the tire pressure monitoring system in my 2021 Chevrolet Silverado 1500 T1XX?

Chevrolet Silverado 1500 T1XX (2019-2023)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
671 words

Problem Statement

Learn how to troubleshoot and repair the Tire Pressure Monitoring System (TPMS) in your 2021 Chevrolet Silverado 1500 T1XX with detailed steps and required tools.

Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
2-4 hours

Symptoms

  • •TPMS warning light illuminated on the dashboard.
  • •Incorrect tire pressure readings on the dashboard display.
  • •Warning message indicating low tire pressure.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner (with TPMS capability)
  • •Tire pressure gauge
  • •Air compressor
  • •TPMS reset tool (optional, depending on the issue)
  • •Basic hand tools (if needed for tire removal)
  • •Owner's manual for reference

Additional Information

Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Certainly! Troubleshooting the Tire Pressure Monitoring System (TPMS) in your 2021 Chevrolet Silverado 1500 T1XX requires a systematic approach. Below are detailed steps, including symptoms, diagnostic steps, tools required, and repair instructions.

Tools Required
  • OBD-II scanner (with TPMS capability)
  • Tire pressure gauge
  • Air compressor
  • TPMS reset tool (optional, depending on the issue)
  • Basic hand tools (if needed for tire removal)
  • Owner's manual for reference

Step 1: Visual Inspection

  1. Check Tire Condition

    • Inspect all tires for visible damage, punctures, or uneven wear.
    • Ensure that the valve stems are not damaged.

  2. Check Tire Pressure

    • Use a tire pressure gauge to measure the pressure in all four tires.
    • Compare the readings to the recommended pressure (usually found on a sticker inside the driver’s door jamb).

Step 2: Reset TPMS

  1. Check for TPMS Reset Procedure

    • Consult the owner's manual for specific reset procedures for your model.
    • Many vehicles require a specific sequence to reset the TPMS.

  2. Perform TPMS Reset

    • Turn the ignition key to the "On" position (do not start the engine).
    • Press the TPMS reset button (if equipped) until the TPMS light blinks three times.
    • Start the engine and drive the vehicle for approximately 10 minutes at speeds above 20 mph to allow the system to recalibrate.

Step 3: Use OBD-II Scanner

  1. Connect OBD-II Scanner

    • Plug the OBD-II scanner into the diagnostic port located under the dashboard.
    • Turn the ignition to the "On" position.

  2. Read TPMS Codes

    • Access the TPMS module via the scanner and read any codes that are present.
    • Write down any trouble codes for further investigation.

Step 4: Check TPMS Sensors

  1. Test Each Sensor

    • If the OBD-II scanner indicates an issue with a specific sensor, you may need to test or replace that sensor.
    • Some scanners allow you to read the live data from each TPMS sensor, confirming their operational status.

  2. Check Battery Life of Sensors

    • Note that most TPMS sensors have a battery life of about 5-7 years. If the vehicle is older or the sensors are original, they may need replacement.
Repair Instructions

Step 1: Reinflate Tires

  • If any tire is found to be low, inflate it to the recommended pressure using an air compressor. Recheck all tires after inflation.

Step 2: Replace Faulty TPMS Sensors

  1. Remove the Wheel

    • Loosen the lug nuts and lift the vehicle with a jack.
    • Remove the lug nuts and take off the wheel.

  2. Access the TPMS Sensor

    • Remove the tire from the rim (this may require a tire machine).
    • Locate the TPMS sensor inside the tire.

  3. Replace the Sensor

    • Remove the old sensor from the valve stem.
    • Install the new sensor, ensuring that it is correctly oriented and securely fastened.

Step 3: Reprogram TPMS Sensors

  1. Reprogramming

    • If the TPMS sensors are new, they may need to be programmed to the vehicle.
    • Use a TPMS reset tool or the OBD-II scanner to program the new sensors.

  2. Reinstall the Tire

    • Mount the tire back onto the rim.
    • Ensure it is properly seated and inflate to the correct pressure.
    • Reinstall the wheel onto the vehicle and tighten the lug nuts to the manufacturer's specifications.
Final Steps
  • After all repairs, reset the TPMS again if necessary.
  • Drive the vehicle for a short distance to ensure the TPMS system recognizes the new sensors and calibrates correctly.
  • Monitor the dashboard for any recurring TPMS warnings.
Conclusion

If the TPMS warning light remains illuminated after following all troubleshooting steps, it may be necessary to consult a professional technician for further diagnostics, as there could be more complex issues at play.