how to reset the maintenance light on BMW X5 G05 (2019-2024)?

BMW X5 G05 (2019-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

401 words

Problem Statement

The maintenance light on a 2019-2024 BMW X5 G05 needs to be reset following the completion of scheduled maintenance.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface during the reset procedure.

Symptoms

•Maintenance light illuminated on the dashboard
•Service reminder notification on the instrument cluster
•No change in vehicle performance

Diagnostic Steps

1
Turn the ignition to the "On" position without starting the engine.
2
Access the "Vehicle Information" menu on the iDrive system.
3
Navigate to "Vehicle Status" and then select "Service Required".
4
Check if the maintenance light is indicated in this menu.
5
Use the iDrive controller to select the option for resetting the service reminder.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition to the "On" position without starting the engine.
2
Access the "Vehicle Information" menu on the iDrive system.
3
Navigate to "Vehicle Status" and then select "Service Required".
4
Check if the maintenance light is indicated in this menu.
5
Use the iDrive controller to select the option for resetting the service reminder.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface with the ignition off.
Have the vehicle keys ready and access to the iDrive system.

2. Turn on Ignition

Insert the key fob into the ignition slot or have it inside the vehicle.
Press the start button without pressing the brake pedal to turn on the ignition (the dashboard lights should illuminate).

3. Access iDrive System

Use the iDrive controller to navigate to the "Menu".
Select "Vehicle Information" by rotating and pressing the controller.

4. Navigate to Vehicle Status

Scroll through the options to find and select "Vehicle Status".
In the Vehicle Status menu, choose "Service Required".

5. Reset Maintenance Light

Highlight the option to reset the maintenance light.
Confirm the reset action when prompted (usually requires pressing the controller).
Wait for the confirmation message indicating that the reset is complete.

6. Turn Off Ignition

Press the start button again to turn off the ignition.
Remove the key fob from the ignition slot if applicable.