how to fix the rearview camera not displaying on my BMW X5 G05 (2019-2024)

BMW X5 G05 (2019-2024)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

501 words

Problem Statement

The rearview camera on a BMW X5 G05 (2019-2024) is not displaying an image on the infotainment screen, potentially affecting safety during reversing maneuvers.

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid short circuits.
•Ensure the vehicle is securely parked and cannot roll while performing repairs.

Symptoms

•Rearview camera image is blank or black
•"Camera malfunction" message on the display
•Delayed activation of the camera when shifting into reverse
•No grid lines or dynamic guidelines displayed
•Camera lens appears dirty or obstructed

Diagnostic Steps

1
Inspect the rearview camera lens for dirt, debris, or damage.
2
Check the vehicle's settings to ensure the rearview camera is enabled.
3
Scan the vehicle's onboard diagnostics (OBD-II) for any fault codes related to the camera system.
4
Examine the wiring harness and connectors for signs of wear, corrosion, or disconnection.
5
Verify the operation of the reverse lights; if they do not illuminate, there may be a wiring issue.
6
Test the camera feed using a diagnostic tool or by connecting a multimeter to check for power supply.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Soft microfiber cloth
•glass cleaner

Parts Required

•Replacement rearview camera (if faulty)
•Wiring harness (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the rearview camera lens for dirt, debris, or damage.
2
Check the vehicle's settings to ensure the rearview camera is enabled.
3
Scan the vehicle's onboard diagnostics (OBD-II) for any fault codes related to the camera system.
4
Examine the wiring harness and connectors for signs of wear, corrosion, or disconnection.
5
Verify the operation of the reverse lights; if they do not illuminate, there may be a wiring issue.
6
Test the camera feed using a diagnostic tool or by connecting a multimeter to check for power supply.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to prevent electrical shorts.

2. Clean the Camera Lens

Tools Required: Soft microfiber cloth, glass cleaner
Wipe the camera lens gently with the microfiber cloth and glass cleaner to remove any dirt or smudges.

3. Inspect and Repair Wiring

Tools Required: Multimeter, socket set
Remove the rear bumper cover to access the camera wiring harness.
Use the multimeter to check for continuity and voltage at the camera connector.
Repair any damaged wires or replace the connector if necessary.

4. Replace the Camera (if faulty)

Tools Required: Socket set, trim removal tools
Unscrew the mounting bolts securing the camera unit.
Disconnect the wiring harness from the camera.
Install the new camera by connecting the wiring harness and securing it with bolts.
Reattach the rear bumper cover.

5. Reconnect Battery and Test

Reconnect the battery and start the vehicle.
Shift into reverse to check if the rearview camera displays correctly on the screen.