how to fix my BMW X5 G05 (2019-2024) that won’t remote start?

BMW X5 G05 (2019-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

557 words

Problem Statement

The BMW X5 G05 (2019-2024) is experiencing an issue where the remote start function is not activating, preventing the vehicle from starting remotely.

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems to prevent shock or damage.

Symptoms

•Remote start feature does not activate when button is pressed.
•No sound or indication that the vehicle is attempting to start.
•Dashboard lights may illuminate briefly but then go off.
•Possible "Remote Start Disabled" message on the dashboard.
•Vehicle may require a key fob to start manually.

Diagnostic Steps

1
Check the vehicle's battery voltage with a multimeter to ensure it is above 12.4 volts.
2
Verify that the key fob is functioning properly by testing its range and battery.
3
Inspect the vehicle's alarm system for any active security triggers that may prevent remote starting.
4
Scan the vehicle’s onboard diagnostics using an OBD-II scanner for any fault codes related to the starting system.
5
Confirm that all doors, hood, and trunk are closed securely as the remote start may be disabled if any are ajar.
6
Check the vehicle settings in the iDrive system to ensure remote start is enabled.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Remove the old battery and insert the new battery, ensuring correct polarity.
•Reassemble the key fob and test the remote start function.

Parts Required

•Key fob battery (CR2450)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Remote start feature does not activate when button is pressed.

•No sound or indication that the vehicle is attempting to start.

•Dashboard lights may illuminate briefly but then go off.

•Possible "Remote Start Disabled" message on the dashboard.

•Vehicle may require a key fob to start manually.

Diagnostic Steps

1
Check the vehicle's battery voltage with a multimeter to ensure it is above 12.4 volts.
2
Verify that the key fob is functioning properly by testing its range and battery.
3
Inspect the vehicle's alarm system for any active security triggers that may prevent remote starting.
4
Scan the vehicle’s onboard diagnostics using an OBD-II scanner for any fault codes related to the starting system.
5
Confirm that all doors, hood, and trunk are closed securely as the remote start may be disabled if any are ajar.
6
Check the vehicle settings in the iDrive system to ensure remote start is enabled.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and the engine is off.
Disconnect the negative terminal of the battery for safety.

2. Replace Key Fob Battery

Tools Required: Small flathead screwdriver, new key fob battery (CR2450).
Using the small flathead screwdriver, gently pry open the key fob to access the battery compartment.
Remove the old battery and insert the new battery, ensuring correct polarity.
Reassemble the key fob and test the remote start function.

3. Check and Reset Vehicle Settings

Reconnect the negative battery terminal.
Turn the ignition to the "ON" position without starting the engine.
Navigate to the vehicle settings on the iDrive screen and select the option for remote start.
Ensure that remote start is enabled; if not, enable it and save the changes.

4. Inspect Alarm System

Check the vehicle’s alarm system components for any signs of damage or malfunction.
Reset the alarm system by locking and unlocking the vehicle using the key fob.
Test the remote start again to see if the issue is resolved.

5. Clear Fault Codes

Tools Required: OBD-II scanner.
Connect the OBD-II scanner to the vehicle's diagnostic port.
Check for any stored fault codes and clear them.
Test the remote start function to verify if the issue persists.