how to fix my BMW X5 G05 (2019-2024) remote start not functioning

BMW X5 G05 (2019-2024)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

4 min read

605 words

Problem Statement

The remote start feature on a 2019-2024 BMW X5 G05 is not functioning, preventing the vehicle from starting remotely.

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid shorts or shocks.

Symptoms

•Remote start button on the key fob is unresponsive
•Check engine light illuminated on the dashboard
•No engine crank or start sound when attempting remote start
•Vehicle not responding to remote key fob commands
•Possible battery drain issues from key fob or vehicle
•Security system warning light activated

Diagnostic Steps

1
Verify that the key fob battery is charged and functioning properly.
2
Use an OBD-II scanner to check for any error codes related to the remote start system.
3
Inspect the vehicle’s battery and electrical connections for any signs of corrosion or loose connections.
4
Check the status of the vehicle’s security system to ensure it is not preventing the remote start function.
5
Confirm that all doors are closed and the vehicle is in park.
6
Review the vehicle’s settings in the infotainment system to ensure remote start is enabled.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Replacement battery (CR2032)

Parts Required

•Key fob battery (CR2032)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Symptoms

•Remote start button on the key fob is unresponsive

•Check engine light illuminated on the dashboard

•No engine crank or start sound when attempting remote start

•Vehicle not responding to remote key fob commands

•Possible battery drain issues from key fob or vehicle

•Security system warning light activated

Diagnostic Steps

1
Verify that the key fob battery is charged and functioning properly.
2
Use an OBD-II scanner to check for any error codes related to the remote start system.
3
Inspect the vehicle’s battery and electrical connections for any signs of corrosion or loose connections.
4
Check the status of the vehicle’s security system to ensure it is not preventing the remote start function.
5
Confirm that all doors are closed and the vehicle is in park.
6
Review the vehicle’s settings in the infotainment system to ensure remote start is enabled.

Solution

1. Key Fob Inspection

Sub-steps:
- Open the key fob using a small flathead screwdriver.
- Inspect the battery for corrosion and replace it if necessary (CR2032 battery typically used).
- Ensure that the battery is seated correctly in the fob.
Tools Required:
- Flathead screwdriver
- Replacement battery (CR2032)

2. Vehicle Battery Check

Sub-steps:
- Disconnect the vehicle battery (negative terminal first).
- Inspect battery terminals for corrosion, clean if necessary using a wire brush.
- Reconnect the battery terminals (positive terminal first).
- Ensure battery voltage is above 12.4 volts using a multimeter.
Tools Required:
- Multimeter
- Wire brush

3. OBD-II Error Code Resolution

Sub-steps:
- Connect the OBD-II scanner to the vehicle’s diagnostic port.
- Retrieve error codes and note any related to the remote start or immobilizer system.
- Clear any error codes and attempt remote start again.
- If error codes reappear, further investigation into specific systems may be required.
Tools Required:
- OBD-II scanner

4. Security System Check

Sub-steps:
- Refer to the owner’s manual to locate the security system reset procedure.
- Perform a reset of the security system by following the manual instructions.
- Attempt to use the remote start feature after the reset.
Tools Required:
- Owner’s manual

5. Settings Verification

Sub-steps:
- Start the vehicle and access the infotainment system.
- Navigate to the settings menu and locate the remote start feature.
- Ensure that remote start is enabled and any required settings (like climate controls) are properly set.
Tools Required:
- Infotainment control interface