FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW X5 F15 (2014-2019) wipers are not working what could be the issue - BMW X5
Home/Cars/BMW/X5/F15 (2014-2019)/my BMW X5 F15 (2014-2019) wipers are not working what could be the issue

my BMW X5 F15 (2014-2019) wipers are not working what could be the issue

BMW X5 F15 (2014-2019)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
524 words

Problem Statement

The windshield wipers on a 2014-2019 BMW X5 (F15) are not functioning, which may indicate an electrical issue, a faulty wiper motor, or a problem with the wiper linkage.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent short circuits.

Symptoms

  • •Wipers do not move at all
  • •Wiper control stalk does not produce any response
  • •No sound from the wiper motor
  • •Washer fluid does not spray
  • •Wipers may operate intermittently or at an incorrect speed (if they do move)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Screwdriver set
  • •Wrench set
  • •Pliers
  • •OBD-II scanner

Parts Required

  • •Wiper motor (if defective)
  • •Wiper linkage (if damaged)
  • •Wiper blades (if worn)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts before beginning the repair.
  • Tools Required:
    • Multimeter
    • Screwdriver set
    • Wrench set
    • Pliers
    • OBD-II scanner
2. Inspect and Replace Fuse
  • Locate the fuse box, typically found in the glove compartment or under the dashboard.
  • Remove the fuse for the windshield wipers using the puller tool or pliers.
  • Inspect the fuse for continuity using a multimeter; replace if blown with a fuse of the same amperage.
3. Test the Wiper Motor
  • Disconnect the wiper motor connector.
  • Use a multimeter to check for power at the connector with the wiper switch activated.
  • If power is present, connect the motor directly to the battery using jumper wires to test its functionality.
  • If the motor does not operate, replace the wiper motor.
4. Inspect and Repair Wiper Linkage
  • Remove the wiper arms by unscrewing the retaining nuts.
  • Carefully lift the wiper arms off the motor shaft.
  • Inspect the wiper linkage for any disconnections or broken components.
  • If damaged, replace the linkage with a new part, ensuring proper alignment.
5. Reassemble Components
  • Reattach the wiper motor and the linkage assembly.
  • Secure the wiper arms back onto the motor shafts and tighten the retaining nuts.
  • Reinstall the fuse if it was removed.