FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my BMW X3 G01 (2018-2024) make a knocking noise when accelerating - BMW X3
Home/Cars/BMW/X3/G01 (2018-2024)/why does my BMW X3 G01 (2018-2024) make a knocking noise when accelerating

why does my BMW X3 G01 (2018-2024) make a knocking noise when accelerating

BMW X3 G01 (2018-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
550 words

Problem Statement

The BMW X3 G01 (2018-2024) is experiencing a knocking noise during acceleration, which could indicate an issue with the engine, drivetrain, or suspension components.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components.

Symptoms

  • •Knocking noise heard during acceleration
  • •Possible vibration felt through the steering wheel
  • •Loss of power or sluggish acceleration
  • •Engine check light may illuminate
  • •Unusual sounds when shifting gears (if applicable)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Locate the engine mounts and visually inspect them for cracks or separation.
  • •If damaged, remove the old engine mounts using the socket set.

Parts Required

  • •Engine mounts (if worn)
  • •Transmission fluid
  • •Transmission filter (if applicable)
  • •Suspension components (if worn)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
2 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the engine is cool.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Inspect and Replace Engine Mounts
  • Tools Required: Socket set, torque wrench, pry bar
  • Locate the engine mounts and visually inspect them for cracks or separation.
  • If damaged, remove the old engine mounts using the socket set.
  • Install new engine mounts by aligning them correctly and tightening to the manufacturer’s specified torque settings.
3. Transmission Fluid Inspection and Replacement
  • Tools Required: Transmission fluid pump, drain pan, socket set
  • Locate the transmission fluid pan and remove the drain plug to let old fluid drain into a pan.
  • Replace the transmission filter if applicable.
  • Refill with the correct type of transmission fluid specified for the BMW X3 G01 (consult owner's manual) using a fluid pump, ensuring it is at the proper level.
4. Suspension Component Inspection and Replacement
  • Tools Required: Jack and jack stands, socket set, torque wrench
  • Lift the vehicle using a jack and secure it with jack stands.
  • Inspect control arms, bushings, and other suspension components for wear.
  • Replace any worn components, ensuring to torque bolts to the specified values.
5. Drive Shaft and CV Joint Inspection
  • Tools Required: Socket set, pry bar
  • Inspect the drive shaft and CV joints for any signs of play or damage.
  • If any issues are found, replace the damaged parts and ensure proper installation.