FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my BMW 5 Series G30/G31 (2017-2024) shake when I brake - BMW 5 Series
Home/Cars/BMW/5 Series/G30/G31 (2017-2024)/why does my BMW 5 Series G30/G31 (2017-2024) shake when I brake

why does my BMW 5 Series G30/G31 (2017-2024) shake when I brake

BMW 5 Series G30/G31 (2017-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
527 words

Problem Statement

The BMW 5 Series G30/G31 (2017-2024) is experiencing shaking or vibration during braking, which may indicate issues with the braking system or suspension components.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always allow the engine to cool before working on the brake system.
  • •Use caution when working with heavy components and ensure the vehicle is securely supported.

Symptoms

  • •Brake pedal vibration when applied
  • •Steering wheel shake during braking
  • •Uneven wear on brake pads
  • •Pulsation felt through the vehicle body
  • •Increased stopping distance
  • •Noise from brakes (squeaking or grinding)

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Jack and jack stands
  • •Lug wrench
  • •Socket set
  • •Torque wrench
  • •Brake cleaner
  • •Micrometer (for rotor thickness)

Parts Required

  • •Brake rotors
  • •Brake pads
  • •Brake grease

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is turned off.
  • Use wheel chocks to prevent movement.
2. Remove Wheel
  • Loosen the lug nuts slightly while the vehicle is on the ground.
  • Raise the vehicle using a jack and secure it with jack stands.
  • Remove the lug nuts completely and take off the wheel.
3. Inspect and Replace Brake Components
  • Inspect Brake Pads and Rotors:

    • Check for uneven wear patterns on the brake pads.
    • Measure rotor thickness with a micrometer; replace if below specifications.
  • Remove Brake Caliper:

    • Use a socket set to remove the caliper mounting bolts.
    • Hang the caliper using a bungee cord to avoid straining the brake line.
  • Remove Brake Rotor:

    • Remove any retaining screws, if present, and slide the rotor off the hub.
  • Replace Components:

    • Install new rotors and brake pads, ensuring proper alignment.
    • Apply brake grease to the pad backing and caliper contact points.
4. Reassemble and Torque
  • Reattach the brake caliper and torque the mounting bolts to the manufacturer’s specifications (usually around 30-40 Nm).
  • Reinstall the wheel and torque the lug nuts in a crisscross pattern to the specified torque (typically 100-120 Nm).
5. Final Checks
  • Lower the vehicle and remove wheel chocks.
  • Pump the brake pedal to seat the pads against the rotors.