FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
what causes my BMW 5 Series G30/G31 (2017-2024) to jerk when accelerating? - BMW 5 Series
Home/Cars/BMW/5 Series/G30/G31 (2017-2024)/what causes my BMW 5 Series G30/G31 (2017-2024) to jerk when accelerating?

what causes my BMW 5 Series G30/G31 (2017-2024) to jerk when accelerating?

BMW 5 Series G30/G31 (2017-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
566 words

Problem Statement

The BMW 5 Series G30/G31 (2017-2024) is experiencing a jerking sensation during acceleration, indicating a potential issue with the engine, transmission, or fuel delivery system.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical components.
  • •Allow engine to cool before performing any engine-related maintenance.

Symptoms

  • •Jerking or hesitation during acceleration
  • •Engine misfire or rough idle
  • •Check engine light illuminated
  • •Increased fuel consumption
  • •Unusual noises from the engine or transmission
  • •Delay in power delivery when pressing the accelerator

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Torque wrench
  • •Multimeter
  • •Cleaning supplies (throttle body cleaner)

Parts Required

  • •Spark plugs
  • •Ignition coils
  • •MAF sensor (if necessary)
  • •Transmission fluid (if needed)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety during repairs.

Tools Required:

  • OBD-II scanner
  • Fuel pressure gauge
  • Socket set
  • Torque wrench
  • Multimeter
  • Cleaning supplies (throttle body cleaner)
2. Replace Spark Plugs and Ignition Coils
  • Remove the engine cover if equipped.
  • Disconnect the electrical connectors from the ignition coils.
  • Unscrew and remove the ignition coils using a socket set.
  • Remove the old spark plugs using a spark plug socket.
  • Install new spark plugs, ensuring proper gap settings as per manufacturer specifications.
  • Reinstall the ignition coils and reconnect electrical connectors.
3. Clean Throttle Body
  • Locate the throttle body and remove the intake duct for access.
  • Use throttle body cleaner and a soft cloth to clean the throttle plate and inside the housing.
  • Reattach the intake duct and ensure all connections are secure.
4. Test and Replace MAF Sensor (if necessary)
  • Disconnect the electrical connector from the MAF sensor.
  • Remove the MAF sensor from the air intake tube.
  • Use a multimeter to check the sensor's output voltage against specifications.
  • If faulty, install a new MAF sensor and reconnect the electrical connector.
5. Check Transmission Fluid
  • Start the vehicle and allow it to reach operating temperature.
  • With the engine running, check the transmission fluid level using the dipstick.
  • If low, add the appropriate type of transmission fluid as specified in the owner's manual.