FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW 5 Series G30/G31 (2017-2024) is leaking coolant, what could be the cause? - BMW 5 Series
Home/Cars/BMW/5 Series/G30/G31 (2017-2024)/my BMW 5 Series G30/G31 (2017-2024) is leaking coolant, what could be the cause?

my BMW 5 Series G30/G31 (2017-2024) is leaking coolant, what could be the cause?

BMW 5 Series G30/G31 (2017-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
531 words

Problem Statement

The 2017-2024 BMW 5 Series G30/G31 is experiencing a coolant leak, which can lead to engine overheating and potential damage if not addressed promptly.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Allow the engine to cool completely before working on the cooling system.
  • •Always wear safety glasses and gloves to prevent injury.

Symptoms

  • •Visible coolant puddles under the vehicle
  • •Sweet smell of coolant inside or around the vehicle
  • •Fluctuating engine temperature gauge
  • •Low coolant warning light illuminated on the dashboard
  • •Steam rising from the engine bay
  • •Engine overheating during operation

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Screwdrivers
  • •Hose clamp pliers
  • •Coolant refill funnel
  • •Torque wrench

Parts Required

  • •Coolant reservoir (if damaged)
  • •Hoses (if worn or damaged)
  • •Radiator (if leaking)
  • •Water pump (if leaking)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the engine is cool before starting any work.
  • Disconnect the battery to prevent electrical issues.
2. Identify and Repair Leak Source
  • Coolant Reservoir

    • Inspect for cracks or damage.
    • If damaged, remove the reservoir by detaching any clips and hoses.
    • Replace with a new coolant reservoir and reconnect hoses.
  • Hoses Inspection

    • Check all cooling system hoses (upper and lower radiator hoses, heater hoses).
    • Replace any damaged or worn hoses by loosening hose clamps and sliding off the old hoses. Install new hoses and secure with clamps.
  • Radiator Check

    • Inspect the radiator for cracks or corrosion.
    • If leaking, remove the radiator by disconnecting the upper and lower hoses, electrical connections, and mounting bolts. Install a new radiator and reconnect all components.
  • Water Pump Replacement

    • Check the water pump for leaks.
    • If leaking, drain coolant, remove the serpentine belt, detach the water pump by loosening bolts, and replace with a new pump. Reassemble and refill coolant.
3. Refill and Bleed the Cooling System
  • Refill the coolant reservoir with the appropriate coolant mixture.
  • Start the engine and allow it to reach operating temperature while monitoring for leaks.
  • Use the bleed valve to remove air from the cooling system if equipped.