FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW 5 Series G30/G31 (2017-2024) has a check engine light and rough idle - BMW 5 Series
Home/Cars/BMW/5 Series/G30/G31 (2017-2024)/my BMW 5 Series G30/G31 (2017-2024) has a check engine light and rough idle

my BMW 5 Series G30/G31 (2017-2024) has a check engine light and rough idle

BMW 5 Series G30/G31 (2017-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
532 words

Problem Statement

The BMW 5 Series G30/G31 (2017-2024) is exhibiting a check engine light and a rough idle, indicating potential engine performance issues.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening any components.

Symptoms

  • •Check engine light illuminated
  • •Rough idle at stop or low speeds
  • •Decreased acceleration response
  • •Possible misfires during acceleration
  • •Fluctuating RPMs while idling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Fuel pressure gauge
  • •Throttle body cleaner
  • •Torque wrench (if applicable)

Parts Required

  • •Spark plugs
  • •Ignition coils (if faulty)
  • •Fuel filter (if applicable)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all tools and parts needed for the repair.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Address Engine Codes
  • Connect the OBD-II scanner and retrieve trouble codes.
  • Document the codes for reference.
  • Clear the codes and start the engine to see if they return.
3. Inspect Spark Plugs and Ignition Coils
  • Remove the engine cover if necessary.
  • Disconnect the electrical connectors from the ignition coils.
  • Unbolt the ignition coils and remove them.
  • Inspect spark plugs for wear; replace if fouled or damaged.
  • Reinstall new spark plugs and ignition coils, ensuring they are properly seated and connected.
4. Check Fuel System
  • Locate the fuel pressure test port on the fuel rail.
  • Connect the fuel pressure gauge and start the engine.
  • Observe the fuel pressure readings; compare them against specifications.
  • If pressure is low, check the fuel pump and filter for issues.
5. Clean Throttle Body
  • Locate the throttle body and remove the air intake duct.
  • Use throttle body cleaner and a soft cloth to clean the throttle plate and surrounding areas.
  • Ensure no debris falls into the intake manifold.
  • Reassemble the intake duct securely.
6. Reinstall Components
  • Reattach any removed components in reverse order of disassembly.
  • Reconnect the negative battery terminal.
  • Ensure all connections are secure.