how to reset transmission fluid service light BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

368 words

Problem Statement

The transmission fluid service light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset after performing a transmission fluid change.

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked securely and on a flat surface before performing the reset.

Symptoms

•Transmission fluid service light illuminated on the dashboard
•No change in transmission performance noted
•No error codes related to transmission found

Diagnostic Steps

1
Verify that the transmission fluid has been properly changed and at the correct level.
2
Connect an OBD-II scanner to the vehicle's diagnostic port.
3
Access the service menu using the scanner to locate the transmission fluid service light reset function.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None for reset; however, ensure proper transmission fluid is used during service.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools: OBD-II scanner, ignition key.

2. Connect OBD-II Scanner

Plug the OBD-II scanner into the vehicle’s diagnostic port located under the dashboard.
Turn the ignition to the "On" position without starting the engine.

Navigate through the scanner's menu to find the "Service" or "Maintenance" section.
Select "Transmission Fluid Service" or similar option.

4. Reset Transmission Fluid Service Light

Follow the prompts on the scanner to initiate the reset procedure.
Confirm the reset when prompted.

5. Disconnect Scanner

Once the reset is successful, disconnect the OBD-II scanner from the vehicle.
Turn off the ignition.

6. Verify Reset

Turn on the ignition and check to ensure the transmission fluid service light is no longer illuminated.