how to reset the tire pressure light on my BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

405 words

Problem Statement

The tire pressure light on a BMW 5 Series G30/G31 (2017-2024) is illuminated, indicating the need to reset the tire pressure monitoring system (TPMS) after adjusting tire pressure

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is stationary and securely parked before performing the reset procedure.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Inaccurate tire pressure readings displayed
•TPMS not recognizing new tire pressures after inflation
•Warning message displayed on the vehicle's information screen

Diagnostic Steps

1
Verify that all tires, including the spare (if applicable), are inflated to the recommended pressure.
2
Check for any visible damages to the tires or sensors that may affect the TPMS.
3
Use an OBD-II scanner to check for any fault codes related to the TPMS.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Parts Required:**
•None required for the reset process.
•Estimated Repair Time:** 10-15 minutes
•Safety Warnings:**
•Always ensure the vehicle is stationary and securely parked before performing the reset procedure.

Parts Required

•None required for the reset process.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure all tires are properly inflated to the manufacturer’s recommended pressure.
Gather necessary tools, including the vehicle's ignition key and OBD-II scanner if needed.

2. Accessing the TPMS Reset Function

Turn the ignition key to the "On" position without starting the engine.
Ensure the vehicle is in a stationary position.
Navigate to the "iDrive" system using the controller:
- Select "Vehicle Information" or "Settings."
- Go to "Tire Pressure Monitor."

3. Resetting the TPMS

Once in the TPMS menu, look for the option to "Reset" or "Initialize."
Select the "Reset" option and confirm the action when prompted.
Wait for the system to complete the reset process, which may take a few minutes.

4. Finalizing the Process

Turn off the ignition and then start the vehicle.
Check if the tire pressure warning light is off.