how to reset the tire pressure light on BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

404 words

Problem Statement

The tire pressure warning light on a 2017-2024 BMW 5 Series G30/G31 is illuminated, indicating that the tire pressure monitoring system (TPMS) requires resetting.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is stationary and parked safely before attempting any resets.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Possible fluctuation in tire pressure readings
•Warning message displayed on the vehicle's information screen
•No physical tire pressure abnormalities observed

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the recommended pressure.
2
Inspect each tire for visible damage or punctures that may affect pressure.
3
Check the vehicle's owner manual for specific TPMS reset instructions relevant to the model.
4
Use an OBD-II scanner to check for any related error codes that may affect the TPMS.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW iDrive system for accessing the reset menu
•Tire pressure gauge for checking tire pressures

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the recommended pressure.
2
Inspect each tire for visible damage or punctures that may affect pressure.
3
Check the vehicle's owner manual for specific TPMS reset instructions relevant to the model.
4
Use an OBD-II scanner to check for any related error codes that may affect the TPMS.

Solution

1. Preparation

Ensure all tires are at the correct pressure as per manufacturer specifications.
Park the vehicle on a flat surface and turn the ignition to the ON position without starting the engine.

Press the "Menu" button on the iDrive controller.
Navigate to "Vehicle Info" > "Tire Pressure Monitor" using the iDrive display.
Select "Reset" or "Reset Tire Pressure" option.

3. Confirm the Reset

Follow the prompts on the screen to confirm the reset of the tire pressure monitoring system.
Wait for the system to process the reset, which may take a few moments.

4. Check Tire Pressure

After resetting, ensure that all tires are still at the correct pressure.
Drive the vehicle for a short distance (approximately 10 minutes) to allow the TPMS to recalibrate.