how to reset the tire pressure light on BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

449 words

Problem Statement

The tire pressure light on a BMW 5 Series G30/G31 (2017-2024) may remain illuminated due to low tire pressure or after adjusting tire pressures, indicating a need for a reset.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a flat and stable surface when checking tire pressures.

Symptoms

•Tire pressure warning light is illuminated on the dashboard
•Incorrect tire pressure readings displayed
•Warning message regarding tire pressure appears on the iDrive screen
•Potential for reduced handling and stability if tire pressure is not corrected

Diagnostic Steps

1
Check the tire pressures of all four tires using a tire pressure gauge.
2
Inflate or deflate tires to the recommended pressure specified on the driver’s door jamb sticker.
3
Ensure that the vehicle is stationary and in the off position before attempting to reset the tire pressure monitoring system (TPMS).
4
Access the iDrive system and navigate to the settings menu.
5
Confirm that no other warning lights are present that could indicate additional issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•BMW key fob

Parts Required

•None (unless TPMS sensors are faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the tire pressures of all four tires using a tire pressure gauge.
2
Inflate or deflate tires to the recommended pressure specified on the driver’s door jamb sticker.
3
Ensure that the vehicle is stationary and in the off position before attempting to reset the tire pressure monitoring system (TPMS).
4
Access the iDrive system and navigate to the settings menu.
5
Confirm that no other warning lights are present that could indicate additional issues.

Solution

1. Preparation

Gather necessary tools: BMW key fob and access to the iDrive system.
Ensure all tires are properly inflated to the manufacturer’s recommended pressures.

2. Access the iDrive System

Turn on the vehicle’s ignition without starting the engine or press the start/stop button once.
Wait for the iDrive system to boot up.

3. Navigate to Tire Pressure Monitoring Settings

Use the iDrive controller to select “Car” from the main menu.
Choose “Status” and then “Tire Pressure Monitor” or “TPM” settings.

4. Reset the Tire Pressure Monitoring System

Select “Reset” or “Initialize” for the tire pressure monitoring system.
Confirm the reset when prompted by selecting “Yes” on the screen.

5. Finalize and Exit

Ensure the reset is complete and exit the menu.
Turn off the ignition and start the vehicle to check if the tire pressure light is off.