how to reset the service light on my BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

375 words

Problem Statement

The service light on a BMW 5 Series G30/G31 (2017-2024) is illuminated, indicating that a scheduled maintenance service is due and needs to be reset.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely before performing the reset.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder message displayed
•No effect on vehicle performance, but indicates upcoming service requirement

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position.
2
Insert the key fob into the ignition slot without starting the engine.
3
Press the start/stop button once to turn on the electrical systems without starting the engine.
4
Use the onboard computer to navigate to the "Vehicle Info" menu.
5
Select "Service Required" to view the maintenance status.
6
Confirm that the service light is active before proceeding to reset.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for this procedure.

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position.
2
Insert the key fob into the ignition slot without starting the engine.
3
Press the start/stop button once to turn on the electrical systems without starting the engine.
4
Use the onboard computer to navigate to the "Vehicle Info" menu.
5
Select "Service Required" to view the maintenance status.
6
Confirm that the service light is active before proceeding to reset.

Solution

1. Preparation

Gather required tools: none needed for this procedure.
Ensure the vehicle is parked on a flat surface and in a safe location.

2. Access the Reset Function

With the ignition on (but engine off), navigate to the "My Vehicle" or "Vehicle Info" menu using the iDrive controller.
Select "Vehicle Status."
Choose "Service Required."

3. Reset the Service Light

Within the "Service Required" section, find the option to "Reset" or "Reset Service Intervals."
Confirm your selection when prompted on the display.
Follow any additional prompts to complete the reset process.

4. Verify the Reset

After the reset, turn off the ignition completely.
Restart the vehicle to ensure the service light is no longer illuminated.