how to reset the service light on my BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

408 words

Problem Statement

The service light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset, indicating that scheduled maintenance has been completed.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stationary position during the reset process.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder messages displayed
•Vehicle may not allow certain settings to be adjusted until the service light is reset

Diagnostic Steps

1
Ensure the vehicle is in a stationary position and the engine is turned off.
2
Insert the key fob into the ignition (do not start the engine).
3
Press the start/stop button once to turn on the ignition without starting the engine.
4
Check if the dashboard displays the service light and any maintenance reminders.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None required for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a stationary position and the engine is turned off.
2
Insert the key fob into the ignition (do not start the engine).
3
Press the start/stop button once to turn on the ignition without starting the engine.
4
Check if the dashboard displays the service light and any maintenance reminders.

Solution

1. Preparation

Gather the required tools: key fob, and ensure the vehicle is in a safe location.
Confirm that the required service has been performed on the vehicle.

With the ignition in the "on" position (without starting the engine), use the button on the wiper stalk to navigate the dashboard.
Press the button until you see the "Vehicle Info" or "Status" option on the display.
Use the joystick or iDrive controller to select the "Service Required" or "Service Menu."

3. Reset the Service Indicator

Navigate to the service item you want to reset (e.g., "Engine Oil," "Brake Fluid," "Microfilter").
Select the service item by pressing the iDrive controller or pressing the button on the steering wheel.
Choose the “Reset” option that appears on the screen.
Confirm the reset by selecting “Yes” when prompted.
Repeat for any additional service items that need to be reset.

4. Verify the Reset

Turn off the ignition and wait for a few seconds.
Turn the ignition back on to check if the service light has been reset successfully.