how to reset the service light on my BMW 5 Series G30/G31 (2017-2024)?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

383 words

Problem Statement

The service light on a 2017-2024 BMW 5 Series G30/G31 needs to be reset after completing maintenance or servicing.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and securely parked before resetting the service light.

Symptoms

•Service light remains illuminated on the dashboard
•Maintenance reminder message displayed on the instrument cluster
•No indication of service being due after maintenance completion
•Engine oil level warning may be displayed if not reset

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position.
2
Insert the key fob into the ignition slot or have it inside the vehicle (for keyless entry).
3
Press the start/stop button without pressing the brake pedal to enter "ON" mode (dashboard lights up).
4
Navigate to the "My Vehicle" menu on the iDrive system.
5
Select "Vehicle Status" and then "Service Required" to check the current service status.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position.
2
Insert the key fob into the ignition slot or have it inside the vehicle (for keyless entry).
3
Press the start/stop button without pressing the brake pedal to enter "ON" mode (dashboard lights up).
4
Navigate to the "My Vehicle" menu on the iDrive system.
5
Select "Vehicle Status" and then "Service Required" to check the current service status.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Have the vehicle keys available.

Turn on the ignition without starting the engine by pressing the start/stop button.
Navigate to the "My Vehicle" option on the iDrive controller.
Select "Vehicle Status" and go to "Service Required".

3. Reset the Service Light

In the "Service Required" menu, select the service that needs resetting (e.g., Engine Oil, Brake Fluid).
Highlight the specific service item.
Press and hold the iDrive controller (or select the option) until the confirmation message appears.
Confirm the reset when prompted by selecting "Yes".

4. Verify Reset

Turn off the ignition and remove the key fob.
Wait a moment and then restart the vehicle to check if the service light is extinguished.