how to reset the oil light in BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

372 words

Problem Statement

The oil light in a 2017-2024 BMW 5 Series (G30/G31) has illuminated, indicating the need for an oil change or maintenance reminder reset.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

•Oil light illuminated on the dashboard
•Possible notifications for oil change due soon
•Engine oil level may be low or needs changing

Diagnostic Steps

1
Verify that the oil level is within the acceptable range using the vehicle’s dipstick.
2
Check the service history to confirm if an oil change was performed recently.
3
Inspect for any leaks or issues related to the oil system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked on a level surface and the engine is turned off.
•Close all doors and ensure the seatbelt is fastened.

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None required for reset
Ensure the vehicle is parked on a level surface and the engine is turned off.
Close all doors and ensure the seatbelt is fastened.

2. Access the Ignition

Insert the key fob into the ignition slot or ensure the keyless entry is ready.
Press the start/stop button without pressing the brake pedal to turn on the ignition (position 2).

Use the iDrive controller to access the main menu on the display screen.
Select "Car" from the menu.
Choose "Service" and then select "Engine Oil".

4. Reset the Oil Service Interval

In the Engine Oil menu, look for the option labeled "Reset" or "Reset Oil Change".
Confirm the reset when prompted by selecting "Yes".

Press the “Back” button to exit the service menu.
Turn off the ignition and remove the key fob.