how to reset the oil change light on BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

375 words

Problem Statement

The oil change light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset after an oil change has been performed.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure vehicle is parked securely and is on a flat surface.

Symptoms

•Oil change light remains illuminated on the dashboard
•Warning message displayed on the instrument cluster
•Engine oil maintenance reminder alerts

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position with the key fob present.
2
Insert the key fob into the ignition slot (if equipped) or have it inside the vehicle.
3
Press the start button without pressing the brake pedal to turn on the electrical systems.
4
Navigate to the "My Vehicle" menu on the iDrive screen.
5
Select "Vehicle Status" and then "Service Required" to access the oil change reminder settings.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position with the key fob present.
2
Insert the key fob into the ignition slot (if equipped) or have it inside the vehicle.
3
Press the start button without pressing the brake pedal to turn on the electrical systems.
4
Navigate to the "My Vehicle" menu on the iDrive screen.
5
Select "Vehicle Status" and then "Service Required" to access the oil change reminder settings.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface with the engine off.
Have the key fob inside the vehicle.

Turn on the vehicle's electrical systems by pressing the start button without pressing the brake pedal.
Use the iDrive controller to navigate to the "My Vehicle" menu on the main screen.

3. Reset the Oil Change Light

Select "Vehicle Status".
Choose "Service Required".
Highlight the oil change reminder option.
Press and hold the iDrive controller button until a confirmation message appears.
Confirm the reset action by selecting "Yes" when prompted.

4. Verify the Reset

Turn off the vehicle completely.
Wait for a few seconds and then restart the engine.
Check that the oil change light is no longer illuminated on the dashboard.