how to reset the oil change light in my BMW 5 Series G30/G31 (2017-2024)?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

420 words

Problem Statement

The oil change light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset after an oil change to ensure proper maintenance tracking.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (or neutral for manual transmission) before performing the reset.

Symptoms

•Oil change light illuminated on the dashboard
•Maintenance reminder showing for oil service
•No change in oil level after recent oil change
•Engine performance not affected

Diagnostic Steps

1
Ensure the vehicle is in a safe and stable position with the engine off.
2
Insert the key fob into the ignition slot or press the start button without pressing the brake pedal to enter accessory mode.
3
Verify that the oil change light is illuminated on the dashboard display.
4
Check the owner's manual for specific instructions related to vehicle settings, if necessary.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob

Parts Required

•None required for resetting the light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in a safe and stable position with the engine off.
2
Insert the key fob into the ignition slot or press the start button without pressing the brake pedal to enter accessory mode.
3
Verify that the oil change light is illuminated on the dashboard display.
4
Check the owner's manual for specific instructions related to vehicle settings, if necessary.

Solution

1. Preparation

Gather the necessary tools (if applicable).
Ensure all doors are closed and the seatbelt is fastened for safety.
Have the vehicle in a well-lit area for visibility.

2. Access the Vehicle Settings

Turn on the ignition without starting the engine (press the start button once without pressing the brake pedal).
Wait for the dashboard lights to illuminate.

Use the iDrive controller located on the center console.
Select "Car" from the main menu.
Navigate to "Service" using the iDrive controller.
Choose "Vehicle Status."

4. Reset the Oil Change Light

Select "Service Required" from the Vehicle Status menu.
Highlight "Engine Oil" or "Oil Change" option.
Press the iDrive controller to enter the reset function.
Confirm the reset when prompted by selecting "Yes."

5. Verify Reset

Turn off the ignition.
Restart the vehicle and check the dashboard for the oil change light.
Ensure the oil change light is no longer illuminated.