how to reset the maintenance light on BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

374 words

Problem Statement

The maintenance light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset after performing maintenance or service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Notifications for scheduled service or maintenance
•No functionality issues with the vehicle

Diagnostic Steps

1
Sit in the driver's seat and close all doors.
2
Insert the key fob into the ignition slot or ensure the vehicle is in the "On" position without starting the engine.
3
Press the gas pedal three times in quick succession to ensure the system is active.
4
Navigate to the "Settings" menu on the iDrive display.
5
Find the "Vehicle Info" section and select "Vehicle Status."
6
Access "Service Required" to view the maintenance light status.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None specifically required for reset.

Parts Required

•None required for reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Sit in the driver's seat and close all doors.
2
Insert the key fob into the ignition slot or ensure the vehicle is in the "On" position without starting the engine.
3
Press the gas pedal three times in quick succession to ensure the system is active.
4
Navigate to the "Settings" menu on the iDrive display.
5
Find the "Vehicle Info" section and select "Vehicle Status."
6
Access "Service Required" to view the maintenance light status.

Solution

1. Preparation

Ensure all doors are closed and the vehicle is in the "On" position.
Have the key fob ready.

2. Access the iDrive System

Press the “Menu” button on the iDrive controller.
Use the controller to scroll to "Settings," then select it.

3. Navigate to Vehicle Status

Select the "Vehicle Info" option from the menu.
Choose "Vehicle Status" to enter the service menu.

4. Reset the Maintenance Light

Locate the "Service Required" option and select it.
Review the services performed; if applicable, proceed to reset.
Look for an option labeled "Reset" or "Reset Service Intervals."
Confirm the reset when prompted.

Press the “Back” button on the iDrive controller until you exit the menu.
Turn off the ignition and remove the key fob.