how to reset my BMW 5 Series G30/G31 (2017-2024) service light after an oil change?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

363 words

Problem Statement

The service light on a BMW 5 Series G30/G31 (2017-2024) needs to be reset following an oil change to ensure the vehicle's maintenance schedule is accurately reflected.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in park before performing the reset.

Symptoms

•Service light illuminated on the dashboard
•Oil change indicator showing on the display
•Incorrect service interval reminders

Diagnostic Steps

1
Insert the key fob into the ignition or press the start button without pressing the brake pedal (to turn on the electrical systems).
2
Navigate to the "My Vehicle" menu on the iDrive screen.
3
Select "Vehicle Status" from the menu options.
4
Choose "Service Requirements" to access the service menu.
5
Locate the "Engine Oil" section to check the current oil service status.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob with remote access

Parts Required

•None required for this procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Insert the key fob into the ignition or press the start button without pressing the brake pedal (to turn on the electrical systems).
2
Navigate to the "My Vehicle" menu on the iDrive screen.
3
Select "Vehicle Status" from the menu options.
4
Choose "Service Requirements" to access the service menu.
5
Locate the "Engine Oil" section to check the current oil service status.

Solution

1. Preparation

Ensure the vehicle is in a safe environment, parked on a flat surface.
Have the vehicle key fob ready.

Turn on the ignition without starting the engine by pressing the start button once.
Wait for the iDrive system to fully boot up.

3. Reset the Service Light

Go to the "My Vehicle" menu on the iDrive screen.
Select "Vehicle Status."
Scroll to "Service Requirements" and press "OK."
Select "Engine Oil" and press "Reset" or “Reset Service.”
Confirm the reset when prompted.

4. Verify the Reset

After the confirmation, check that the service light has been turned off by returning to the "Service Requirements" menu.