how to replace the battery in my BMW 5 Series G30/G31 (2017-2024) key fob?

BMW 5 Series G30/G31 (2017-2024)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

459 words

Problem Statement

The key fob for the BMW 5 Series G30/G31 (2017-2024) is not functioning properly, indicating that the battery needs to be replaced.

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Handle the battery with care; do not short-circuit or dispose of it improperly.

Symptoms

•Key fob not responding to button presses
•Reduced operational range of the key fob
•Warning message on the vehicle's display indicating low key fob battery
•Difficulty unlocking or locking the vehicle remotely

Diagnostic Steps

1
Confirm the key fob is not functioning by trying to lock/unlock the vehicle from a short distance.
2
Check for any warning messages on the vehicle's dashboard related to the key fob.
3
Test the key fob's operational range by moving closer to the vehicle.
4
Compare with another working key fob to determine if the issue is isolated to one key fob.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver or plastic pry tool

Parts Required

•CR2450 battery

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Confirm the key fob is not functioning by trying to lock/unlock the vehicle from a short distance.
2
Check for any warning messages on the vehicle's dashboard related to the key fob.
3
Test the key fob's operational range by moving closer to the vehicle.
4
Compare with another working key fob to determine if the issue is isolated to one key fob.

Solution

1. Preparation

Gather necessary tools:
- Flathead screwdriver or plastic pry tool
- New CR2450 battery
Ensure a clean work area and have a small container to hold small parts.

2. Open the Key Fob

Locate the seam of the key fob.
Insert the flathead screwdriver or plastic pry tool into the seam.
Gently twist to separate the two halves of the key fob without damaging the casing.

3. Remove the Old Battery

Identify the battery compartment within the fob.
Carefully lift the old battery out using the screwdriver or your fingers. Note the orientation of the battery (positive side up).

4. Install the New Battery

Place the new CR2450 battery into the compartment, ensuring the positive side is facing the same direction as the old battery.
Press down gently until the battery is seated securely.

5. Reassemble the Key Fob

Align the two halves of the key fob.
Firmly press them together until you hear a click, indicating they are locked back in place.

6. Test the Key Fob

Stand near the vehicle and press the lock/unlock buttons to ensure it is functioning correctly.
Confirm the operational range is restored.