FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the AC not cooling in my BMW 5 Series G30/G31 (2017-2024) - BMW 5 Series
Home/Cars/BMW/5 Series/G30/G31 (2017-2024)/how to fix the AC not cooling in my BMW 5 Series G30/G31 (2017-2024)

how to fix the AC not cooling in my BMW 5 Series G30/G31 (2017-2024)

BMW 5 Series G30/G31 (2017-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
556 words

Problem Statement

The air conditioning system in a BMW 5 Series G30/G31 (2017-2024) is not providing adequate cooling, leading to uncomfortable cabin temperatures.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before performing repairs to avoid burns.

Symptoms

  • •Air conditioning blows warm air instead of cold
  • •AC compressor not engaging
  • •Unusual noises coming from the AC system
  • •Foul odor from the vents
  • •Reduced airflow from the AC vents
  • •Check engine or AC warning light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •AC manifold gauge set
  • •Refrigerant canister
  • •Socket set
  • •Torque wrench
  • •Screwdrivers

Parts Required

  • •Refrigerant (R-134a or R-1234yf)
  • •Cabin air filter
  • •AC compressor (if needed)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the vehicle's battery to prevent any electrical issues during repair.
2. Recharge the AC System
  1. Connect Gauges: Attach AC manifold gauges to the high and low pressure service ports.
  2. Check Pressure: Observe the readings; if low, proceed to recharge.
  3. Recharge Refrigerant: Using a refrigerant canister, follow the manufacturer's specifications to add refrigerant until the proper levels are reached.
    • Ensure to use R-134a or R-1234yf as specified for the vehicle.
3. Replace Cabin Air Filter
  1. Locate Filter: Open the glove box and remove it to access the cabin air filter compartment.
  2. Remove Old Filter: Pull out the old cabin air filter and inspect for dirt and debris.
  3. Install New Filter: Insert the new filter, ensuring it is oriented correctly according to airflow direction.
4. Repair or Replace AC Compressor
  1. Inspect Compressor: If the compressor is not engaging, check for electrical issues or malfunction.
  2. Remove Compressor: Disconnect the AC lines and electrical connectors, then unbolt the compressor from its mounting brackets.
  3. Install New Compressor: Position the new compressor in place and secure it with the bolts to the mounting brackets.
5. Test System
  1. Reconnect Battery: Reattach the battery and turn on the ignition.
  2. Start Engine: Run the engine and set the AC to maximum.
  3. Monitor Performance: Check the AC performance to ensure it is cooling effectively.