FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix my BMW 5 Series G30/G31 (2017-2024) that won't start? - BMW 5 Series
Home/Cars/BMW/5 Series/G30/G31 (2017-2024)/how to fix my BMW 5 Series G30/G31 (2017-2024) that won't start?

how to fix my BMW 5 Series G30/G31 (2017-2024) that won't start?

BMW 5 Series G30/G31 (2017-2024)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
546 words

Problem Statement

The BMW 5 Series G30/G31 (2017-2024) is experiencing a no-start condition, which may be due to various electrical or mechanical issues.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent shocks or shorts.
  • •Allow the vehicle to cool before inspecting the fuel system to avoid burns.

Symptoms

  • •Engine cranks but does not start
  • •No crank when the ignition is turned on
  • •Dashboard warning lights illuminated
  • •Fuel pump noise absent when ignition is in the ON position
  • •Battery warning light on
  • •Unresponsive key fob

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Fuel pressure gauge
  • •Fuse puller or needle-nose pliers
  • •Jumper wires

Parts Required

  • •New battery (if necessary)
  • •Fuel pump relay (if faulty)
  • •Fuses (if blown)
  • •Starter motor (if defective)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure you have the vehicle on a flat surface and secure it with wheel chocks.
  • Disconnect the negative battery terminal using a socket set to avoid electrical shock.
2. Battery Inspection and Replacement
  • Tools Needed: Multimeter, socket set, battery terminal cleaner.
  • Measure the battery voltage. If below 12.4 volts, charge or replace the battery.
  • Clean the battery terminals with a terminal cleaner brush and reconnect them securely.
3. Fuse Inspection
  • Tools Needed: Fuse puller or needle-nose pliers.
  • Locate the fuse box (usually found under the dashboard or in the engine compartment).
  • Inspect fuses related to the ignition and fuel pump, replacing any that are blown with fuses of the same amperage.
4. Fuel System Check
  • Tools Needed: Fuel pressure gauge.
  • If the fuel pump was silent, check the fuel pump relay and replace if faulty.
  • If the relay is operational, connect the fuel pressure gauge to the fuel rail to ensure the pump is delivering the required pressure (typically 50-70 psi for most BMW models).
5. Starter Motor Testing
  • Tools Needed: Multimeter, jumper wires.
  • Use jumper wires to bypass the ignition switch and connect the starter directly to the battery.
  • If the starter does not engage, replace it with a new unit, ensuring proper torque specifications are followed (typically 20-30 Nm).