FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why is my BMW 5 Series F10/F11 (2010-2017) using so much fuel? - BMW 5 Series
Home/Cars/BMW/5 Series/F10/F11 (2010-2017)/why is my BMW 5 Series F10/F11 (2010-2017) using so much fuel?

why is my BMW 5 Series F10/F11 (2010-2017) using so much fuel?

BMW 5 Series F10/F11 (2010-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
588 words

Problem Statement

The BMW 5 Series F10/F11 (2010-2017) is experiencing excessive fuel consumption, which may indicate underlying mechanical or electronic issues affecting the vehicle's efficiency.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening the fuel system.

Symptoms

  • •Check engine light illuminated
  • •Rough idle or engine misfire
  • •Decreased acceleration performance
  • •Unusually high fuel gauge reading
  • •Increased exhaust emissions or smell of fuel
  • •Poor throttle response

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Multimeter
  • •MAF cleaner spray

Parts Required

  • •Fuel filter (if necessary)
  • •Spark plugs
  • •Ignition coils (if necessary)
  • •MAF sensor (if necessary)
  • •Oxygen sensors (if necessary)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Address Fuel System Issues
  • Check Fuel Pressure

    • Use a fuel pressure gauge to test the pressure at the fuel rail. Compare readings to specifications.
    • If pressure is too high or low, inspect the fuel pump and pressure regulator for failures.
  • Inspect for Fuel Leaks

    • Visually inspect fuel lines, injectors, and connections for any signs of leakage.
    • Replace any damaged fuel lines or faulty injectors.
3. Replace Spark Plugs and Ignition Coils
  • Remove Ignition Coils

    • Unplug the electrical connectors from the ignition coils.
    • Use a socket set to remove the bolts securing the coils and pull them out.
  • Replace Spark Plugs

    • Use a spark plug socket to remove old spark plugs. Check for wear or fouling.
    • Install new spark plugs with the correct gap as per manufacturer specifications.
4. Clean or Replace MAF Sensor
  • Cleaning MAF Sensor

    • Disconnect the MAF sensor from the intake.
    • Use MAF cleaner spray to gently clean the sensor elements. Allow it to dry completely before reinstalling.
  • Replacement (if necessary)

    • If cleaning does not yield results, replace the MAF sensor with a new unit.
5. Inspect and Replace Oxygen Sensors
  • Testing Oxygen Sensors
    • Use a multimeter to check the voltage output of the O2 sensors.
    • If readings are out of specification, replace the faulty sensor.
6. Tire and Wheel Check
  • Inspect Tires
    • Check tire pressure and inflate to the recommended level if necessary.
    • Inspect tread depth and replace tires if excessively worn.