FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my BMW 5 Series F10/F11 (2010-2017) vibrate when idling - BMW 5 Series
Home/Cars/BMW/5 Series/F10/F11 (2010-2017)/why does my BMW 5 Series F10/F11 (2010-2017) vibrate when idling

why does my BMW 5 Series F10/F11 (2010-2017) vibrate when idling

BMW 5 Series F10/F11 (2010-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
558 words

Problem Statement

The BMW 5 Series F10/F11 (2010-2017) is experiencing vibrations while idling, indicating a potential issue with the engine or related components.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Ensure the engine is cool before working on any components to avoid burns.

Symptoms

  • •Engine vibrations felt through the steering wheel and chassis
  • •Check engine light illuminated
  • •Rough idle or fluctuating RPMs
  • •Unusual noises from the engine compartment
  • •Decreased fuel efficiency
  • •Potential engine stalling

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Jack and jack stands
  • •Screwdriver set

Parts Required

  • •Engine mounts
  • •Spark plugs
  • •Ignition coils (if needed)
  • •Vacuum hoses (if needed)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface with the engine turned off.
  • Disconnect the battery to prevent electrical issues during repairs.
2. Inspect and Replace Engine Mounts
  1. Lift the Vehicle: Use a jack and jack stands to lift the front of the vehicle.
  2. Remove Engine Cover: If applicable, remove the engine cover by unscrewing the fasteners.
  3. Inspect Engine Mounts: Check the engine mounts for cracks or excessive wear.
  4. Remove Engine Mounts:
    • Use a socket set to remove the bolts securing the mounts to the engine and chassis.
    • Carefully lift the engine slightly using a hoist or jack to relieve pressure on the mounts.
  5. Install New Engine Mounts:
    • Position the new mounts and tighten the bolts to the manufacturer’s specifications (typically around 25-30 Nm).
    • Reinstall any components removed, including the engine cover.
3. Check and Repair Vacuum Leaks
  1. Inspect Vacuum Hoses: Look for any cracked or loose hoses connected to the intake manifold.
  2. Replace Damaged Hoses: Use appropriate-sized replacement hoses and clamps, ensuring a snug fit.
  3. Test for Leaks: After repairs, start the engine and listen for hissing noises indicating leaks.
4. Replace Spark Plugs and Ignition Coils (if necessary)
  1. Remove Ignition Coils: Disconnect the electrical connectors and remove the bolts holding the coils in place.
  2. Replace Spark Plugs: Use a spark plug socket to remove old plugs and install new ones, torqued to specifications (usually around 25 Nm).
  3. Reinstall Ignition Coils: Secure the coils back in place and reconnect the electrical connectors.