why does my BMW 5 Series F10/F11 (2010-2017) transmission slip when accelerating

BMW 5 Series F10/F11 (2010-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

549 words

Problem Statement

The transmission in a BMW 5 Series F10/F11 (2010-2017) is experiencing slipping during acceleration, which can lead to loss of power and decreased performance.

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission pan to avoid burns.

Symptoms

•Engine RPM increases without corresponding vehicle speed increase
•Delayed engagement when shifting gears
•Harsh or erratic shifting feel
•Check engine light illuminated
•Fluid leaks under the vehicle
•Increased fuel consumption

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics using an OBD-II scanner to check for any trouble codes related to the transmission.
2
Inspect the transmission fluid level and condition; look for signs of contamination or burnt smell.
3
Check for any fluid leaks around the transmission pan or cooler lines.
4
Test the transmission solenoids for proper operation using a multimeter.
5
Inspect the transmission filter for clogging or damage.
6
Examine the engine mounts and transmission mounts for wear or damage, which can affect shifting.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Multimeter
•Transmission fluid pump

Parts Required

•Transmission fluid
•Transmission filter
•Transmission pan gasket
•Transmission solenoids (if needed)
•Engine/transmission mounts (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics using an OBD-II scanner to check for any trouble codes related to the transmission.
2
Inspect the transmission fluid level and condition; look for signs of contamination or burnt smell.
3
Check for any fluid leaks around the transmission pan or cooler lines.
4
Test the transmission solenoids for proper operation using a multimeter.
5
Inspect the transmission filter for clogging or damage.
6
Examine the engine mounts and transmission mounts for wear or damage, which can affect shifting.

Solution

1. Preparation

Gather all necessary tools and parts before beginning repairs.
Ensure the vehicle is parked on a level surface and the engine is off.
Disconnect the battery to prevent electrical issues during repairs.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Remove the transmission pan using a socket set, being careful to catch any fluid that drains out.
2. Inspect the transmission filter; replace it if it is clogged or damaged.
3. Clean the transmission pan and magnet to remove any metal shavings or debris.
4. Reinstall the transmission filter and pan using a new gasket, torquing the bolts to the manufacturer's specifications.
5. Refill the transmission with the correct type and amount of fluid as specified in the owner's manual.

3. Test and Replace Transmission Solenoids

Sub-steps:
1. Locate the transmission solenoids and disconnect the electrical connectors.
2. Use a multimeter to test for resistance and functionality according to the specifications in the service manual.
3. If any solenoids are faulty, replace them with new ones, ensuring proper alignment and connections.

4. Inspect and Replace Engine/Transmission Mounts

Sub-steps:
1. Lift the vehicle securely using a jack and jack stands.
2. Inspect the engine and transmission mounts for signs of wear or damage.
3. If damaged, remove the bolts securing the mounts and replace them with new ones, torquing to specifications.