FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my BMW 5 Series F10/F11 (2010-2017) have a rough engine noise during idle - BMW 5 Series
Home/Cars/BMW/5 Series/F10/F11 (2010-2017)/why does my BMW 5 Series F10/F11 (2010-2017) have a rough engine noise during idle

why does my BMW 5 Series F10/F11 (2010-2017) have a rough engine noise during idle

BMW 5 Series F10/F11 (2010-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
532 words

Problem Statement

The BMW 5 Series F10/F11 (2010-2017) is experiencing a rough engine noise at idle, indicating potential issues with engine components or performance.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before opening any components.

Symptoms

  • •Rough engine idle
  • •Unusual knocking or tapping noise from the engine compartment
  • •Fluctuating RPM at idle
  • •Possible vibrations felt in the cabin
  • •Check engine light may be illuminated
  • •Decreased fuel efficiency

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Spark plug socket
  • •Fuel pressure gauge
  • •Torque wrench

Parts Required

  • •Spark plugs
  • •Ignition coils (if faulty)
  • •Vacuum hoses or gaskets (if damaged)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the battery to ensure safety while working on electrical components.
  • Allow the engine to cool before inspection.
2. Inspect and Replace Spark Plugs
  • Remove the engine cover (if applicable) using a socket set.
  • Disconnect the electrical connectors from the ignition coils.
  • Remove the ignition coils by unscrewing them from the cylinder head.
  • Extract the spark plugs using a spark plug socket.
  • Inspect spark plugs for wear or fouling, replacing them if necessary.
    • Torque: Tighten new spark plugs to 23 Nm (17 ft-lbs).
  • Reinstall ignition coils and reconnect electrical connectors.
3. Check for Vacuum Leaks
  • Visually inspect all vacuum hoses for cracks or disconnections.
  • Spray a small amount of carburetor cleaner around the intake manifold and vacuum lines while the engine is running. Listen for changes in idle speed.
  • Replace any damaged hoses or gaskets found during inspection.
4. Inspect Engine Mounts
  • Check engine mounts visually for cracks or excessive wear.
  • Replace any damaged engine mounts to reduce vibrations.
5. Test Fuel Pressure
  • Connect a fuel pressure gauge to the fuel rail.
  • Turn the ignition to the "ON" position without starting the engine to check the pressure.
  • Compare the reading with manufacturer specifications (typically around 50-60 psi for BMW).
  • If pressure is low, check the fuel pump and filter for issues.