my BMW 5 Series F10/F11 (2010-2017) has transmission codes P0715-P0799 what does this mean

BMW 5 Series F10/F11 (2010-2017)

Error Codes

3-5 hours

Time

medium

Difficulty

medium

Severity

Error Code: P0715-P0799

3 min read

551 words

Problem Statement

The BMW 5 Series F10/F11 (2010-2017) is experiencing transmission-related trouble, indicated by the presence of diagnostic trouble codes (DTCs) P0715 through P0799. These codes ge

Error Code

P0715-P0799

Estimated Time

3-5 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission or working with fluid.

Symptoms

•Check engine light illuminated
•Erratic shifting or slipping during gear changes
•Transmission overheating
•Delayed engagement when shifting into drive or reverse
•Unusual noises from the transmission area
•Poor acceleration performance

Diagnostic Steps

1
Scan for Error Codes**: Use an OBD-II scanner to identify specific codes and related data.
2
Inspect Transmission Fluid**: Check fluid level and condition; look for burnt smell or contamination.
3
Examine Wiring and Connectors**: Inspect wiring harness and electrical connectors for damage or corrosion, particularly those related to the transmission sensors.
4
Test Transmission Sensors**: Check the functionality of transmission speed sensors (input and output) using a multimeter.
5
Check for Mechanical Issues**: Perform a visual inspection of the transmission for any visible leaks or damage to components.
6
Road Test the Vehicle**: Observe the behavior of the transmission under different driving conditions, taking note of any abnormal shifting patterns.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Fluid pump

Parts Required

•Input speed sensor
•Output speed sensor
•Transmission filter (if applicable)
•Transmission fluid (specific to BMW specifications)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for Error Codes**: Use an OBD-II scanner to identify specific codes and related data.
2
Inspect Transmission Fluid**: Check fluid level and condition; look for burnt smell or contamination.
3
Examine Wiring and Connectors**: Inspect wiring harness and electrical connectors for damage or corrosion, particularly those related to the transmission sensors.
4
Test Transmission Sensors**: Check the functionality of transmission speed sensors (input and output) using a multimeter.
5
Check for Mechanical Issues**: Perform a visual inspection of the transmission for any visible leaks or damage to components.
6
Road Test the Vehicle**: Observe the behavior of the transmission under different driving conditions, taking note of any abnormal shifting patterns.

Solution

1. Preparation

Gather tools and parts.
Disconnect the battery to ensure safety while working on electrical components.
Tools required: OBD-II scanner, multimeter, socket set, torque wrench, fluid pump.

2. Replace Faulty Sensors

Remove Old Sensors:
- Locate the input and output speed sensors on the transmission.
- Disconnect the electrical connectors and remove the mounting screws.
Install New Sensors:
- Position the new sensors in place and secure them with screws.
- Reconnect the electrical connectors ensuring a snug fit.

3. Change Transmission Fluid

Drain Old Fluid:
- Position a drain pan under the transmission pan.
- Remove the pan's bolts and carefully lower it to drain the fluid.
Replace Filter (if applicable):
- Remove the old filter and install the new one.
Refill with New Fluid:
- Using a fluid pump, refill the transmission with the manufacturer-recommended fluid type.
- Ensure the fluid level is within the proper range as per specifications.

4. Reconnect Battery and Test

Reconnect the battery.
Clear any existing codes using the OBD-II scanner.
Perform a road test to confirm that the transmission operates smoothly without error codes.