FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW 5 Series F10/F11 (2010-2017) has a rough idle, what could be causing this? - BMW 5 Series
Home/Cars/BMW/5 Series/F10/F11 (2010-2017)/my BMW 5 Series F10/F11 (2010-2017) has a rough idle, what could be causing this?

my BMW 5 Series F10/F11 (2010-2017) has a rough idle, what could be causing this?

BMW 5 Series F10/F11 (2010-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
536 words

Problem Statement

The BMW 5 Series F10/F11 (2010-2017) is experiencing a rough idle, which may indicate underlying engine performance issues.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Relieve fuel pressure before removing fuel lines to prevent spills and potential fire hazards.

Symptoms

  • •Check engine light illuminated
  • •Engine stalling at idle
  • •Rough or uneven engine vibration
  • •Poor fuel economy
  • •Increased emissions
  • •Unusual noises from the engine bay

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Throttle body cleaner
  • •Fuel pressure gauge
  • •Smoke machine (optional)

Parts Required

  • •Spark plugs
  • •Ignition coils (if necessary)
  • •Throttle body gasket (if applicable)
  • •Fuel filter
  • •Vacuum hoses (if needed)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather required tools and parts.
  • Disconnect the battery to ensure safety while working on electrical components.
2. Inspect and Replace Spark Plugs
  • Remove the ignition coil covers using a socket set.
  • Disconnect the electrical connectors from the ignition coils.
  • Remove the coils and inspect spark plugs. Replace if worn, using the correct specification (e.g., Bosch or NGK).
  • Torque new spark plugs to manufacturer specifications (typically around 22 Nm).
3. Clean or Replace Throttle Body
  • Remove the air intake duct to access the throttle body.
  • Disconnect the throttle body electrical connector and remove the mounting bolts.
  • Clean the throttle body using throttle body cleaner and a soft brush.
  • If replacement is necessary, install the new throttle body and torque bolts to the specified value.
4. Inspect and Replace Fuel Filter
  • Locate the fuel filter; it may be in the fuel tank or along the fuel line.
  • Relieve fuel pressure by removing the fuel pump fuse and running the engine until it stalls.
  • Disconnect fuel lines (ensure to have rags or a container to catch any spills).
  • Replace the fuel filter with a new one, ensuring all connections are secure.
5. Check and Repair Vacuum Leaks
  • Inspect all vacuum hoses for cracks or disconnections.
  • Replace any damaged hoses.
  • Use a smoke machine if available to detect leaks more effectively.