FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my BMW 5 Series F10/F11 (2010-2017) feels like it's stalling when I stop what should I check - BMW 5 Series
Home/Cars/BMW/5 Series/F10/F11 (2010-2017)/my BMW 5 Series F10/F11 (2010-2017) feels like it's stalling when I stop what should I check

my BMW 5 Series F10/F11 (2010-2017) feels like it's stalling when I stop what should I check

BMW 5 Series F10/F11 (2010-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
577 words

Problem Statement

The BMW 5 Series F10/F11 (2010-2017) experiences stalling sensations when coming to a stop, which may indicate issues with the engine or transmission.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Allow the engine to cool before inspecting components under the hood.

Symptoms

  • •Engine stuttering or shaking when idling
  • •Check engine light illuminated
  • •Rough idle when the vehicle is at a complete stop
  • •Possible increase in fuel consumption
  • •Unusual noises from the engine compartment
  • •Transmission slipping or delayed engagement

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Throttle body cleaner
  • •Soft cloth
  • •Multimeter
  • •Fuel pressure gauge

Parts Required

  • •Throttle body gasket (if removed)
  • •Idle air control valve (if faulty)
  • •Fuel filter (if clogged)

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather required tools and parts.
  • Park the vehicle on a level surface and engage the parking brake.
  • Disconnect the battery to ensure safety.
2. Inspect and Clean the Throttle Body
  • Tools Required: Socket set, throttle body cleaner, soft cloth, screwdriver.
  • Remove the air intake duct connected to the throttle body.
  • Disconnect the throttle body electrical connector.
  • Remove the throttle body using appropriate socket size.
  • Clean the throttle body with throttle body cleaner and a soft cloth to remove carbon buildup.
  • Reinstall the throttle body and reconnect the electrical connector.
3. Test the Idle Air Control Valve (IAC)
  • Tools Required: Multimeter, socket set.
  • Locate the IAC valve (typically mounted on the intake manifold).
  • Disconnect the electrical connector from the IAC valve.
  • Using a multimeter, test for continuity across the IAC terminals.
  • If the valve is faulty, replace it with a new one.
4. Check Fuel System
  • Tools Required: Fuel pressure gauge, socket set.
  • Locate the fuel pressure test port on the fuel rail.
  • Connect the fuel pressure gauge and turn the ignition to the "On" position (do not start).
  • Check if the fuel pressure is within manufacturer specifications (typically around 50-60 psi).
  • If low, inspect the fuel filter and fuel pump for issues; replace if necessary.
5. Reassemble and Final Checks
  • Reinstall any components removed during inspection.
  • Reconnect the battery.
  • Clear any diagnostic trouble codes using the OBD-II scanner.