how to reset the tire pressure light on BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

361 words

Problem Statement

The tire pressure light on a BMW 5 Series F10/F11 (2010-2017) is illuminated and needs to be reset after addressing the tire pressure issue.

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface before checking tire pressures.

Symptoms

•Tire pressure warning light remains illuminated on the dashboard
•Potential fluctuation in tire pressure readings
•Vehicle may show a "Check Tire Pressure" message on the display
•Unusual handling or road noise may be present if tire pressure is low

Diagnostic Steps

1
Verify tire pressures using a tire pressure gauge to ensure they are at the recommended levels.
2
Check for any visible damage to the tires that may affect pressure readings.
3
Inspect the tire pressure monitoring system (TPMS) sensors for proper function.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Vehicle owner's manual (for reference)

Parts Required

•None for the reset process

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure all tires are inflated to the correct pressure as per the manufacturer's specifications.
Turn on the vehicle's ignition without starting the engine.

2. Access the iDrive System

Use the controller to navigate to the "Menu."
Select "Vehicle Info" or "Car" from the options.
Navigate to "Vehicle Status."

3. Reset the Tire Pressure Monitoring System

Select "Tire Pressure Monitor" or "TPM."
Choose "Reset" or "Reset Tire Pressure."
Confirm the reset when prompted on the screen.

4. Complete the Process

Turn off the ignition and wait for a few seconds.
Start the vehicle and verify that the tire pressure light has turned off.