how to reset the service light on my BMW 5 Series F10/F11 (2010-2017)?

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

445 words

Problem Statement

The service light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after maintenance has been performed.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface before starting the reset procedure.

Symptoms

•Service light illuminated on the dashboard
•Reminder messages for service due
•Inability to clear service messages through normal driving

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position and the key is removed from the ignition.
2
Insert the key fob into the ignition slot (do not start the engine).
3
Press the "Start" button without pressing the brake pedal to turn on the ignition.
4
Navigate to the "BC" (Board Computer) button on the turn signal stalk and press it until the "Service" menu appears on the display.
5
Select the appropriate service item that needs resetting (e.g., Oil Service, Inspection) using the "BC" button.
6
Press and hold the trip reset button (located on the instrument cluster) until the reset confirmation message appears.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position and the key is removed from the ignition.
2
Insert the key fob into the ignition slot (do not start the engine).
3
Press the "Start" button without pressing the brake pedal to turn on the ignition.
4
Navigate to the "BC" (Board Computer) button on the turn signal stalk and press it until the "Service" menu appears on the display.
5
Select the appropriate service item that needs resetting (e.g., Oil Service, Inspection) using the "BC" button.
6
Press and hold the trip reset button (located on the instrument cluster) until the reset confirmation message appears.

Solution

1. Preparation

Gather all necessary tools: key fob, user manual (for reference if needed).
Ensure the vehicle is parked safely and the ignition is off.

Insert the key fob into the ignition.
Press the "Start" button once (without pressing the brake) to turn on the ignition.
Wait for the dashboard lights to illuminate.

3. Navigating to Service Reset

Locate the "BC" button on the turn signal stalk.
Press the "BC" button until the "Service" menu is displayed on the dashboard screen.
Identify which service item requires resetting (Oil, Inspection, etc.).

4. Resetting the Service Light

Press and hold the trip reset button on the instrument cluster until the reset confirmation message appears on the screen.
Release the trip reset button and confirm the reset if prompted.

5. Finalizing

Turn off the ignition by pressing the "Start" button again.
Remove the key fob and then reinsert it to ensure the service light is off.