how to reset the oil service light on my BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

5-10 minutes

Time

medium

Difficulty

medium

Severity

3 min read

422 words

Problem Statement

The oil service light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after an oil change or maintenance service.

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface and in "Park" to avoid any accidental movement during the reset process.

Symptoms

•Oil service light illuminated on the dashboard
•Service reminder message displayed
•No engine performance issues associated with the reset process

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position.
2
Insert the key fob into the ignition without starting the engine.
3
Press the "Start/Stop" button without pressing the brake pedal to turn on the ignition.
4
Observe the dashboard lights; the oil service light should be illuminated.
5
Navigate to the trip meter reset button on the instrument cluster.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position.
2
Insert the key fob into the ignition without starting the engine.
3
Press the "Start/Stop" button without pressing the brake pedal to turn on the ignition.
4
Observe the dashboard lights; the oil service light should be illuminated.
5
Navigate to the trip meter reset button on the instrument cluster.

Solution

1. Preparation

Gather necessary tools: key fob, and ensure you are in a safe environment with the vehicle in "Park".
Ensure the vehicle is off before starting the procedure.

Turn the ignition to the "ON" position without starting the engine (press the "Start/Stop" button without pressing the brake pedal).
Wait until the dashboard lights, including the oil service light, are illuminated.

3. Reset the Oil Service Light

Locate the trip odometer reset button on the instrument cluster.
Press and hold the trip odometer reset button.
While holding the button, turn the ignition off and then back on to the "ON" position (do not start the engine).
Continue to hold the trip odometer reset button for approximately 10 seconds; the service indicator will begin to flash.
Release the trip odometer reset button, and the oil service light should turn off.

4. Confirm the Reset

Turn the ignition off.
Turn the ignition back to the "ON" position and check the dashboard to ensure the oil service light is no longer illuminated.