how to reset my BMW 5 Series F10/F11 (2010-2017) service light after an oil change

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

370 words

Problem Statement

The service light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after an oil change to reflect the new service interval.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked on a level surface before performing any resets.

Symptoms

•Service light remains illuminated after oil change
•Incorrect service interval displayed on the dashboard
•Reminder notification for oil service remains active

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position and the keys are removed from the ignition.
2
Insert the key fob into the ignition slot (do not start the engine).
3
Press the "Start/Stop" button without pressing the brake pedal to turn on the electrical systems.
4
Use the "BC" button on the turn signal lever to navigate to the "Service" menu on the instrument cluster.
5
Check the service status to confirm the oil change is due.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No special tools required for the reset process.

Parts Required

•No parts are required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the "OFF" position and the keys are removed from the ignition.
2
Insert the key fob into the ignition slot (do not start the engine).
3
Press the "Start/Stop" button without pressing the brake pedal to turn on the electrical systems.
4
Use the "BC" button on the turn signal lever to navigate to the "Service" menu on the instrument cluster.
5
Check the service status to confirm the oil change is due.

Solution

Turn on the ignition without starting the engine by pressing the "Start/Stop" button.
Press the "BC" button on the turn signal stalk until the "Service" menu appears on the dashboard display.

2. Reset the Oil Service Light

Navigate to the "Oil" option in the Service menu using the "BC" button.
Press and hold the "BC" button until the display shows a confirmation message to reset.
Confirm the reset by pressing the "BC" button again when prompted.

3. Verify Reset

After resetting, the service light should turn off.
Turn off the ignition and then restart the vehicle to ensure the service light is no longer illuminated.