how to reset BMW 5 Series F10/F11 (2010-2017) service light

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

382 words

Problem Statement

The service light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after performing maintenance or service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and in park before performing the reset.

Symptoms

•Service light illuminated on the dashboard
•Maintenance reminder message displayed
•Vehicle does not clear service history automatically

Diagnostic Steps

1
Turn the ignition key to the "ON" position without starting the engine.
2
Make sure the odometer is displayed on the dashboard.
3
Press and hold the trip reset button on the instrument cluster.
4
While holding the trip reset button, turn the ignition key to the "OFF" position and then back to the "ON" position.
5
Release the trip reset button once the service light begins to flash.
6
Follow the prompts on the dashboard to confirm the reset.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner (optional)
•Owner’s manual (for reference)

Parts Required

•None required for reset.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the "ON" position without starting the engine.
2
Make sure the odometer is displayed on the dashboard.
3
Press and hold the trip reset button on the instrument cluster.
4
While holding the trip reset button, turn the ignition key to the "OFF" position and then back to the "ON" position.
5
Release the trip reset button once the service light begins to flash.
6
Follow the prompts on the dashboard to confirm the reset.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (optional), Owner’s manual (for reference).
Ensure the vehicle is in a safe and stationary position.

2. Turning On Ignition

Insert the key into the ignition.
Turn the ignition switch to the "ON" position without starting the engine.

3. Resetting the Service Light

Press and hold the trip reset button (located on the instrument cluster).
While holding the button, turn the ignition back to the "OFF" position and then immediately to "ON" again.
Release the button when the service light begins to flash.
Wait for the reset confirmation message to appear on the dashboard.
Confirm the reset by following any additional prompts if necessary.

4. Completion

Turn the ignition to the "OFF" position.
Start the engine to ensure the service light is off.