FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix transmission slipping on my BMW 5 Series F10/F11 (2010-2017) - BMW 5 Series
Home/Cars/BMW/5 Series/F10/F11 (2010-2017)/how to fix transmission slipping on my BMW 5 Series F10/F11 (2010-2017)

how to fix transmission slipping on my BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
504 words

Problem Statement

The transmission in a BMW 5 Series F10/F11 (2010-2017) is experiencing slipping, which can lead to a loss of power and difficulty in maintaining speed.

Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening transmission components.

Symptoms

  • •Check engine light illuminated
  • •Engine revs without corresponding vehicle acceleration
  • •Harsh or delayed shifting between gears
  • •Transmission overheating warning
  • •Fluid leaks under the vehicle
  • •Poor fuel economy

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Drain the old transmission fluid by removing the drain plug or pan (if applicable).
  • •Replace the transmission filter if necessary.

Parts Required

  • •Transmission fluid
  • •Transmission filter
  • •Gasket for transmission pan

Additional Information

Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
2 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is on a level surface and the engine is cool.
  • Gather necessary tools and parts.
  • Disconnect the negative battery terminal.
2. Check and Replace Transmission Fluid
  • Tools Required: Socket set, funnel, transmission fluid pump.
  • Inspect the transmission fluid dipstick for level and quality; if it’s low or burnt, proceed to replace.
  • Drain the old transmission fluid by removing the drain plug or pan (if applicable).
  • Replace the transmission filter if necessary.
  • Refill with manufacturer-recommended transmission fluid using a funnel until the fluid reaches the correct level.
3. Inspect and Replace Transmission Filter
  • Tools Required: Socket set, gasket scraper, torque wrench.
  • Remove the transmission pan if applicable.
  • Clean the pan and magnet of any debris.
  • Remove the old filter and install the new one.
  • Replace the pan with a new gasket, tightening bolts to the specified torque.
4. Adjust Transmission Bands (if applicable)
  • Tools Required: Wrench set, torque wrench.
  • Locate the band adjustment screws as per the service manual.
  • Adjust the screws to the manufacturer’s specifications to ensure proper band tension.
5. Reconnect Battery and Test Drive
  • Reconnect the negative battery terminal.
  • Start the vehicle and check for leaks.
  • Test drive the vehicle to ensure smooth shifting and verify that slipping has been resolved.