how to fix P0750 code in my BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

Error Code: P0750

3 min read

548 words

Problem Statement

The P0750 code indicates a problem with the transmission control system in the BMW 5 Series F10/F11 (2010-2017), specifically related to the shift solenoid A.

Error Code

P0750

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening the transmission system.

Symptoms

•Check engine light illuminated
•Rough or harsh shifting between gears
•Transmission slipping or delayed engagement
•Increased engine RPM without corresponding vehicle acceleration
•Unusual noises from the transmission
•Failure to enter certain gears

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0750 and check for any other related codes.
2
Inspect the transmission fluid level and condition; look for burnt smell or debris.
3
Check the electrical connectors and wiring harness for the transmission solenoid for any signs of damage or corrosion.
4
Perform a resistance test on the shift solenoid A using a multimeter to determine if it is functioning within factory specifications.
5
Inspect the transmission control module (TCM) for fault codes and functionality.
6
Conduct a road test to monitor transmission behavior and identify any patterns in symptoms.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Sub-steps:**
•Remove the transmission pan by loosening the bolts and carefully prying it off.
•Drain the transmission fluid into a clean container.
•Disconnect the electrical connector from the solenoid.
•Remove the solenoid by unbolting it from its mount.
•Reconnect the electrical connector.

Parts Required

•Shift solenoid A
•Transmission filter (if applicable)
•Gasket for transmission pan (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to confirm P0750 and check for any other related codes.
2
Inspect the transmission fluid level and condition; look for burnt smell or debris.
3
Check the electrical connectors and wiring harness for the transmission solenoid for any signs of damage or corrosion.
4
Perform a resistance test on the shift solenoid A using a multimeter to determine if it is functioning within factory specifications.
5
Inspect the transmission control module (TCM) for fault codes and functionality.
6
Conduct a road test to monitor transmission behavior and identify any patterns in symptoms.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent electrical shorts while working on the transmission.

2. Inspect and Replace Shift Solenoid A

Tools Required: Socket set, torque wrench, multimeter, OBD-II scanner, transmission fluid.
Sub-steps:
1. Remove the transmission pan by loosening the bolts and carefully prying it off.
2. Drain the transmission fluid into a clean container.
3. Locate the shift solenoid A within the transmission assembly (refer to the service manual for exact location).
4. Disconnect the electrical connector from the solenoid.
5. Remove the solenoid by unbolting it from its mount.
6. Install the new shift solenoid A, ensuring it is seated properly and secured with bolts to the manufacturer's torque specifications.
7. Reconnect the electrical connector.

3. Reassemble and Refill Transmission

Sub-steps:
1. Clean the transmission pan and replace the filter if necessary.
2. Reinstall the transmission pan, ensuring a proper seal; torque to specifications.
3. Refill the transmission with the appropriate type and amount of fluid as specified in the owner’s manual.
4. Reconnect the battery.