how to fix P0011 camshaft position timing issue BMW 5 Series F10/F11 (2010-2017)

Solution

1. Preparation

• Gather necessary tools and parts.
• Disconnect the vehicle battery to ensure safety.
• Lift the vehicle using a jack and secure it with jack stands.

2. Change Engine Oil and Filter

• Sub-steps:
  • Drain the engine oil using a drain pan; remove the oil pan plug.
  • Replace the oil filter with a new one, ensuring the rubber O-ring is intact.
  • Refill the engine with the manufacturer-recommended oil type and quantity.
• Tools Required: Oil filter wrench, drain pan, socket set, funnel.

3. Replace VVT Solenoid

• Sub-steps:
  • Locate the VVT solenoid, typically found on the engine's cylinder head.
  • Disconnect the electrical connector and remove the mounting bolts.
  • Install the new VVT solenoid and torque the bolts to the manufacturer specification (usually around 10 Nm).
  • Reconnect the electrical connector.
• Tools Required: Socket set, torque wrench.

4. Inspect and Adjust Timing Chain/Belt

• Sub-steps:
  • Remove necessary engine components (e.g., engine cover, timing cover) to access the timing chain/belt.
  • Check for proper alignment of timing marks; adjust if necessary.
  • Replace any worn or damaged components like the timing chain/belt or tensioner.
  • Reassemble all removed components and torque to the specified values.
• Tools Required: Socket set, timing tool kit, torque wrench.

5. Replace Camshaft Position Sensor

• Sub-steps:
  • Locate the camshaft position sensor, typically positioned near the camshaft.
  • Disconnect the electrical connector and remove the mounting bolts.
  • Install the new sensor and torque the bolts to the manufacturer's specifications.
  • Reconnect the electrical connector.
• Tools Required: Socket set, torque wrench.