how to diagnose P0750 transmission code on BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

Error Code: P0750

4 min read

656 words

Problem Statement

The vehicle is displaying a P0750 code, which indicates a malfunction related to the transmission shift solenoid A on a BMW 5 Series F10/F11 (2010-2017).

Error Code

P0750

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before starting work on the transmission.

Symptoms

•Check engine light illuminated
•Harsh shifting or slipping during gear changes
•Transmission stuck in one gear
•Poor acceleration
•Unusual noises from the transmission (grinding or whining)
•Increased fuel consumption

Diagnostic Steps

1
Scan for error codes** using an OBD-II scanner to confirm the P0750 code and check for any additional codes.
2
Inspect the transmission fluid level and condition** to ensure it is at the correct level and not burnt or contaminated.
3
Check wiring and connectors** to the transmission solenoids for any signs of damage, corrosion, or loose connections.
4
Perform a visual inspection** of the transmission control module (TCM) for any signs of water intrusion or physical damage.
5
Test the resistance of the shift solenoid A** using a multimeter to determine if it is within the manufacturer’s specified range.
6
Examine the input and output speed sensors** to ensure they are functioning correctly and providing the correct readings to the TCM.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Torque wrench
•Fluid pump (for refilling)

Parts Required

•Shift solenoid A
•Transmission fluid (specific to BMW specifications)
•Transmission pan gasket (if applicable)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes** using an OBD-II scanner to confirm the P0750 code and check for any additional codes.
2
Inspect the transmission fluid level and condition** to ensure it is at the correct level and not burnt or contaminated.
3
Check wiring and connectors** to the transmission solenoids for any signs of damage, corrosion, or loose connections.
4
Perform a visual inspection** of the transmission control module (TCM) for any signs of water intrusion or physical damage.
5
Test the resistance of the shift solenoid A** using a multimeter to determine if it is within the manufacturer’s specified range.
6
Examine the input and output speed sensors** to ensure they are functioning correctly and providing the correct readings to the TCM.

Solution

1. Preparation

Gather all necessary tools and parts before starting the repair.
Disconnect the vehicle battery to ensure safety while working on the electrical components.
Raise the vehicle securely on jack stands if necessary to access the transmission components.

2. Inspect and Repair Wiring

Check the wiring harness leading to the transmission solenoid for any frays or breaks.
Repair or replace damaged wiring as needed.
Ensure all connectors are secured and free of corrosion.

3. Replace Shift Solenoid A

Remove transmission pan:
- Use a socket set to remove the bolts securing the transmission pan.
- Carefully lower the pan and drain the transmission fluid into a clean container.
Remove the old solenoid:
- Locate shift solenoid A inside the transmission.
- Disconnect the electrical connector and remove the retaining bolts.
- Extract the solenoid from its housing.
Install the new solenoid:
- Insert the new shift solenoid A into the designated slot.
- Secure it with the retaining bolts and connect the electrical connector.
Reinstall the transmission pan:
- Clean the mating surface on the transmission and pan.
- Apply a new gasket or sealant as required.
- Reattach the transmission pan and torque the bolts to manufacturer specifications.

4. Fill Transmission Fluid

Refill the transmission with the appropriate type and amount of fluid as specified in the vehicle's service manual.
Start the engine and allow it to reach operating temperature while checking for leaks.

5. Clear Codes and Test Drive

Use the OBD-II scanner to clear the P0750 code from the vehicle's computer.
Perform a test drive to verify that the issue has been resolved and that the transmission operates smoothly.