how do I reset the oil light in my BMW 5 Series F10/F11 (2010-2017)

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

357 words

Problem Statement

The oil light in a BMW 5 Series F10/F11 (2010-2017) needs to be reset following an oil change or maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked securely and is not in motion while performing the reset.

Symptoms

•Oil light remains illuminated on the dashboard
•Oil change service indicator displayed
•No engine performance issues, but maintenance alert present

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is off.
2
Insert the key fob into the ignition without starting the engine.
3
Press the start/stop button once to turn on the electrical systems without starting the engine.
4
Use the iDrive controller to navigate to the “Vehicle Information” menu on the display screen.
5
Select “Vehicle Status” and then “Service Required” to access the oil change settings.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW key fob
•iDrive controller

Parts Required

•None, as this is a reset procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a level surface and the engine is off.
2
Insert the key fob into the ignition without starting the engine.
3
Press the start/stop button once to turn on the electrical systems without starting the engine.
4
Use the iDrive controller to navigate to the “Vehicle Information” menu on the display screen.
5
Select “Vehicle Status” and then “Service Required” to access the oil change settings.

Solution

1. Prepare for Reset

Ensure the vehicle is in a safe stationary position.
Ensure the key fob is in the ignition or the car is in accessory mode.

Use the iDrive controller to select “My Vehicle” from the home screen.
Go to “Vehicle Status” and select “Service Required.”

3. Reset the Oil Light

Select “Engine Oil” from the service menu.
Once in the Engine Oil menu, look for the “Reset” option.
Confirm the reset when prompted; the oil light should turn off.

4. Verify Reset

Turn off the ignition.
Restart the vehicle to ensure the oil light is no longer illuminated.