how can I reset the BMW 5 Series F10/F11 (2010-2017) oil service light?

BMW 5 Series F10/F11 (2010-2017)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

3 min read

414 words

Problem Statement

The oil service light on a BMW 5 Series F10/F11 (2010-2017) needs to be reset after an oil change.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe position with the engine off before performing the reset.

Symptoms

•Oil service light illuminated on the dashboard
•Incorrect oil change interval displayed
•Engine oil level warning (if applicable)

Diagnostic Steps

1
Ensure the vehicle is parked on a flat surface and the engine is off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to turn on the electrical systems (without starting the engine).
3
Access the vehicle’s dashboard menu by navigating using the iDrive controller (if equipped).
4
Select the "Vehicle Information" option on the screen.
5
Look for "Service Requirements" or "Service Intervals" in the menu.
6
Locate the option to reset the oil service light.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob or ignition key

Parts Required

•None required for resetting

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is parked on a flat surface and the engine is off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal to turn on the electrical systems (without starting the engine).
3
Access the vehicle’s dashboard menu by navigating using the iDrive controller (if equipped).
4
Select the "Vehicle Information" option on the screen.
5
Look for "Service Requirements" or "Service Intervals" in the menu.
6
Locate the option to reset the oil service light.

Solution

1. Preparation

Gather the key fob and ensure you are seated comfortably in the driver’s seat.
Ensure all doors are closed and the vehicle is in park.

2. Resetting the Oil Service Light

Turn on the Ignition:
- Insert the key fob and press the start button (without pressing the brake pedal) or turn the ignition to the "On" position.
Access the Service Menu:
- Use the iDrive controller to navigate to "Vehicle Information".
- Select "Service Requirements".
Select Oil Service Reset:
- Find the option labeled “Engine Oil” or "Oil Service".
- Highlight this option using the iDrive controller.
Perform Reset:
- Press and hold the iDrive controller button until a confirmation message appears.
- Confirm the reset action by selecting "Yes".
Turn Off Ignition:
- Turn off the ignition completely and remove the key fob.
Verify Reset:
- Restart the vehicle and check that the oil service light is no longer illuminated.