how to reset the tire pressure monitoring system in my BMW 3 Series G20/G21 (2019-2024)

BMW 3 Series G20/G21 (2019-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

377 words

Problem Statement

The Tire Pressure Monitoring System (TPMS) in a BMW 3 Series G20/G21 (2019-2024) needs to be reset, typically after adjusting tire pressures or replacing tires.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always check tire pressures when tires are cold for accurate readings.

Symptoms

•TPMS warning light illuminated on the dashboard
•Incorrect tire pressure readings displayed
•Warning message indicating "Check Tire Pressure"
•Inconsistent tire pressure alerts after inflation

Diagnostic Steps

1
Verify that all tire pressures are set to the manufacturer's recommended levels.
2
Turn the vehicle ignition to the "On" position without starting the engine.
3
Navigate to the vehicle settings using the iDrive controller.
4
Access the "Tire Settings" menu in the iDrive system.
5
Select the option to reset the TPMS.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•iDrive controller

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tire pressures are set to the manufacturer's recommended levels.
2
Turn the vehicle ignition to the "On" position without starting the engine.
3
Navigate to the vehicle settings using the iDrive controller.
4
Access the "Tire Settings" menu in the iDrive system.
5
Select the option to reset the TPMS.

Solution

1. Preparation

Ensure all tires are inflated to the correct pressure.
Gather necessary tools: iDrive controller, user manual (optional for reference).

2. Access iDrive System

Turn on the Ignition: Insert the key fob and press the start button without pressing the brake pedal to turn on the ignition.
Activate iDrive: Use the iDrive controller to access the main menu on the display.

3. Navigate to Tire Settings

Select 'Car': From the main menu, choose the "Car" option.
Open 'Settings': Scroll through the menu and select "Settings."
Choose 'Tire Settings': Locate and select the "Tire Settings" option.

4. Reset TPMS

Select 'Reset Tire Pressure Monitor': Find the option to reset the TPMS.
Confirm Reset: Follow the prompts to confirm the reset action. The system will now recalibrate.

5. Exit iDrive

After the reset is confirmed, exit the iDrive system and turn off the ignition.