how to reset the tire pressure monitoring system in BMW 3 Series G20/G21 (2019-2024)

BMW 3 Series G20/G21 (2019-2024)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

2 min read

393 words

Problem Statement

The Tire Pressure Monitoring System (TPMS) in a BMW 3 Series G20/G21 (2019-2024) requires resetting after tire rotation, replacement, or adjustment of tire pressure.

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked securely to prevent rolling while performing the reset procedure.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings
•Warning message indicating low tire pressure
•Difficulty in resetting the TPMS through normal procedures

Diagnostic Steps

1
Verify that all tires are inflated to the manufacturer's recommended pressure.
2
Check the TPMS sensor functionality using a diagnostic tool.
3
Inspect for any damaged or malfunctioning TPMS sensors.
4
Ensure that the vehicle's battery is fully charged to prevent electronic issues during the reset.
5
Confirm that the vehicle is in the correct mode (ignition on, engine off) for resetting the TPMS.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•BMW iDrive controller (vehicle's built-in system)

Parts Required

•TPMS sensors (if replacement is necessary)
•Tire pressure gauge (for checking tire pressure)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Verify that all tires are inflated to the manufacturer's recommended pressure.
2
Check the TPMS sensor functionality using a diagnostic tool.
3
Inspect for any damaged or malfunctioning TPMS sensors.
4
Ensure that the vehicle's battery is fully charged to prevent electronic issues during the reset.
5
Confirm that the vehicle is in the correct mode (ignition on, engine off) for resetting the TPMS.

Solution

1. Preparation

Gather all necessary tools and components.
Ensure the vehicle is parked on a flat surface and the tires are properly inflated.

Turn on the vehicle without starting the engine (press the start button without pressing the brake pedal).
Use the iDrive controller to navigate to "Vehicle Settings."
Select "Tire Pressure Monitor" from the list.

3. Reset TPMS

In the Tire Pressure Monitor menu, select "Reset."
Confirm the reset by selecting "Yes" when prompted.
Wait for the system to process the reset. This may take a few seconds.

4. Verify Reset Success

Exit the menu and check if the TPMS warning light has turned off.
Drive the vehicle at a speed above 20 mph for a few minutes to ensure the system recalibrates.