how to reset the service light on my BMW 3 Series G20/G21 (2019-2024)?

BMW 3 Series G20/G21 (2019-2024)

Error Codes

10-15 minutes

Time

medium

Difficulty

medium

Severity

2 min read

396 words

Problem Statement

The service light on a 2019-2024 BMW 3 Series G20/G21 needs to be reset after completing the maintenance service.

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

•Service light remains illuminated on the dashboard
•Notification for scheduled maintenance appears
•Service reminders are displayed in the instrument cluster

Diagnostic Steps

1
Ensure the vehicle is completely turned off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal (in keyless models).
3
Access the instrument cluster by pressing the start button without starting the engine.
4
Use the left steering wheel controls to navigate the menu.
5
Locate the "Settings" or "Vehicle Info" section on the display.
6
Find the "Service Required" or "Oil Service" option.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Key fob

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is completely turned off.
2
Insert the key fob into the ignition or press the start button without pressing the brake pedal (in keyless models).
3
Access the instrument cluster by pressing the start button without starting the engine.
4
Use the left steering wheel controls to navigate the menu.
5
Locate the "Settings" or "Vehicle Info" section on the display.
6
Find the "Service Required" or "Oil Service" option.

Solution

1. Preparation

Gather the necessary tools: key fob and access to the dashboard display.
Ensure the vehicle is in a safe area to perform the reset.

With the vehicle in the "On" position (without starting the engine), press the "Start" button.
Use the left arrow button on the steering wheel to scroll through the display until you reach the "Settings" menu.
Select "Vehicle Info" and press the "OK" button.

3. Reset the Service Light

In the "Vehicle Info" menu, scroll to "Service Required."
Select the "Oil Service" or relevant service item you wish to reset.
Highlight the option to reset the service light.
Confirm the reset when prompted by selecting "Yes."

4. Verification of the Reset

Exit the menu by pressing the "Back" button or using the left arrow.
Turn off the ignition and then restart the engine to check if the service light is no longer illuminated.